Having worked for 30 plus years in the Weatherization program I was not rich.  When we had the opportunity 3 years ago to build a new home for my wife and I we tried to take our Building Science knowledge and build a home close to zero fossil fuel heat.  Thought I would share with the group how we have almost achieved this for under $40,000 by building a pole constructed house.  

http://cheoyleeassociation.com/family/NCHouse.html  is the link to the page on our construction process etc.  

James McGarvey

Views: 448

Replies to This Discussion

Hi James, Great house !!! Four years ago I built a similar pole house for customers up here in Brookfield,NY. The big difference was it was built on grade with a super insulated slab. Walls were 8 inches thick and foamed with a thermal break on the exterior of hi "R" board. Ceiling is R-60 with 6 mil poly installed below joists with sealed penetrations. This was not designed to passive house standards but it's pretty tight. My customers are pretty happy and their heating bills are well south of $100.00 per month for a 1200 sq ft house. As you know the winters can be pretty brutal up here in upstate NY so my customers were very happy with the low energy bills and the low cost of construction. I'm now looking at alternatives for my own land. I presently live in one end of my barn in a 1600 sq ft "apartment" that I completed 6 years ago. I have 46 acres with a south facing hill. I'm looking at a earth sheltered home or another pole structure. I'm leary of the earth sheltered home because of moisture issues and the cost of concrete so I may go with the pole structure...Thanks for the inspiration. Matt Redmond

Pole foundations are affordable, but I have to wonder if you would have been better off stopping them at the floor. We put so much effort into isolating the thermal bridges created from studs, and here you have these large diameter poles passing from outside into the interior of the house.

That said, the house looks great and I'm sure outperforms other thoughtless construction.

Greg, if I had built platform construction on top of the poles then would have had headers over doors and windows, thus more lumber in walls, With the wall system I ended up with about 10 inches of wood at the poles, built my inside wall to edge of girt so pole has airspace to inside.  Recently with 30 degree delta t and thermal scan could not see poles in walls.  James

That's a great thing....

I understand what you are saying - your poles are inboard of the exterior walls, so yes, you don't have temperature gradient across the diameter of the pole, but no, you have a gradient over the length of the pole which at the exterior temperature below the floor level and above grade, but then at near room temperature in the house.

I don't want to contradict you, but header conditions need not be significantly different in platform framing from what you've done. Non bearing end walls would not need headers, and on the bearing walls headers at openings would replace beams running the entire length of the house. I'd say the trade off is minimal as far as the quantity of wood, and insulated headers could mitigate these few instances. I'd have to say that the headers would represent less thermal bridging than the poles.

You probably are correct Greg, but one advantage of the pole construction for me was since the process took so long building by myself for the most part I was able to put roof on first and therefore not get my wall assembles and sub floor wet.  We had a couple of nights last week in the upper 40's here and with only internal gains house was 76 degrees in morning,  When I get my solar hot air collector system built I think I can heat with $10 worth of wood or $50 electric on the mini split.  I am happy with what we accomplished for less than $50 grand.

Well it looks great - must be so satisfying as well. Hope to do the same some day. Keep us posted as you settle in and go through a few seasons!

RSS

Discussion Forum

Affordable Energy Efficient Design

Started by Dannie Jackson Nov 23, 2017. 0 Replies

Whats the Consensus of this group Define "Energy Efficiency"

Started by Barry NewDelman. Last reply by Dannie Jackson Nov 23, 2017. 2 Replies

No More "Damn Architects!" - The Case for Integrated Design

Started by Chris Laumer-Giddens. Last reply by Dennis Heidner Jan 16, 2014. 6 Replies

Energy Efficient Design for the not so rich

Started by James McGarvey. Last reply by Greg La Vardera Apr 11, 2013. 7 Replies

Latest Activity

Leslie Jackson replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Thanks Rich, I hope they thought of that, but you are on to something. I think I learn more doing…"
13 minutes ago
grey staples commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"Curious to know how the kWh production turned out relative to what the installer indicated you…"
41 minutes ago
Brennan Less commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"Hey Chris, y'all are kicking butt!! I'm sure your new HVAC won't use any energy,…"
42 minutes ago
Rich Manning replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Have them call a HVAC contractor and install a filter system"
43 minutes ago
Rich Manning replied to Jerry Needham's discussion Condensation on ceiling and walls of master bedroom
"Looks like a leaking ridge vent"
47 minutes ago
Jonathan Nadle liked Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
1 hour ago
Matt Peterson posted a blog post

Gas Line Installation In Portland OR Code Basics

When you're looking to undertake any kind of a remodel or repair in your home it's important to…See More
1 hour ago
Brennan Less liked Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
1 hour ago
Pearl Home Certification posted a blog post

Press Release: HomeSmart International Joins the Pearl Broker Advantage Program

Vienna, Virginia and Scottsdale, Arizona – July 19, 2018 – Pearl Certification and HomeSmart…See More
2 hours ago
Franco Oyuela commented on Allison A. Bailes III's blog post The Ductopus or the Centipede - Which HVAC Duct System Is Better?
"Many older homes were constructed without air ducts. Ductless systems can provide much needed air…"
2 hours ago
Franco Oyuela commented on Chris Laumer-Giddens's blog post The Ductless Mini-Split Heat Pump's Big Brother - CITY MULTI
"The compact design and long piping system gives homeowners free reign for designing a ductless…"
2 hours ago
Terry Hill's event was featured

Passive House Institute US 2018 Conference at Boston

September 19, 2018 at 6pm to September 23, 2018 at 7pm
Annual conferenceSee More
2 hours ago
Franco Oyuela commented on Allison A. Bailes III's blog post How the Heck Does a Heat Pump Get Heat from Cold?!
"Like conventional central heat pumps, ductless mini-split heat pumps manipulate refrigerant to move…"
2 hours ago
Leslie Jackson replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Thanks, Larry! You are probably not confused! Apply skin, not a Band-Aid ... or something like…"
2 hours ago
Larry Weingarten replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Hello,  I'm probably confused, but I'd want to know where the dust and dirt are…"
3 hours ago
Diane Chojnowski posted discussions
4 hours ago
Leslie Jackson posted a discussion

DIY Filter Solution for an Evaporative Cooler, anyone?

If your general "info@" e-mail inbox is like mine, it is 95% SPAM but once in a while, as long as…See More
20 hours ago
Franco Oyuela commented on Silvie Votrubova's blog post Duct Testing Accuracy
"The ducts that are part of central heating and cooling systems offer one of the best opportunities…"
22 hours ago
DEREK KENNA joined Kim Tanner's group
Thumbnail

TEC

Discussion group for The Energy ConservatoryHave a question about residential or big building air…See More
yesterday
Don Fugler replied to Linda Wigington's discussion Good Eating with Reduced Cooking Emissions in the group Kitchen Ventilation
"I found that I was less likely to prompt a large spike when I started the pan on medium heat rather…"
yesterday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service