Designing for High Performance: Slab-On-Grade, Part I – Controlling Moisture Flow

We’re just a few weeks away from a computer generated, self-guided interactive virtual tour of the Serenbe Residence. We’re using REVIT software to generate the 3D model, then  VIMTREK will animate the tour.

What you will see in the tour is the home’s modern design, its 3 bedrooms and 2.5 baths, its great views of the central Georgia landscape, and its outdoor kitchen and fire pit. What you won’t necessarily see are some of the details that make it a high performance home, where we employ some of the best practices of building science and energy efficient design.

Details, Details, Details…

The biggest opportunity in designing for high performance is in controlling the flow of heat, air and moisture. Do this well, and the home will be comfortable, healthy, efficient, and will last a long time. Here is the slab-on-grade detail for the Serenbe home. We’re going to walk through the moisture control methods we employed. In Part II, we’ll focus on controlling heat. Finally, in Part III, concentrate on controlling air. Moisture is first, because it should be.

Designing for High Performance Slab On Grade Part I Controlling Moisture

Keeping water out is perhaps the most important thing you can do in a building because prevents mold, condensation, water damage, indoor comfort issues, and more.

For the first layer of control (bulk moisture) on this above grade wall, we have Nichiha®cementitious siding. Just behind that, we’ve chosen a layer of 1/4″ rain screen, called Home Slicker, to create a gap which keeps any moisture that develops behind the cladding flowing down the wall via the drainage plane and out.

For our drainage plane, we’re using the OSB layer (with its built-in water resistive barrier) of the 1″ Zip System® R-Panel. At the base of the wall, and at all openings, is continuous aluminum flashing, which is also taped to the R-Panel withZip System® tape to maintain a continuous drainage plane. In the event that moisture does get in to the wall, which would most likely be airborne, not bulk, moisture, the materials have been selected to have a permeability that allows that moisture to get out of the cavity.

This is a critical point about designing building assemblies. They MUST have drying potential, either inward or outward or both. It’s why the industry has tried to get away from putting vapor retarders, and other impermeable materials in walls (including vinyl wall coverings).

At grade level you will see that we have called out for a minimum 5% slope away from the building with an impermeable back-fill layer to prevent saturation of ground adjacent to foundation. The free-draining back-fill layer allows a free flow of any moisture toward the even more free-draining layer of stone. The continuous drainage tile is set below the top of the footing, and well below the bottom of the slab, to collect water that makes its way down and takes it to daylight, and somewhere downhill and away from the foundation.

The foundation wall is coated in damproofing, and then another drainage plane, in this case Delta-Drain®, is used to allow any bulk water that happens to make its way to the foundation wall, down to the drainage tile and away from the wall and footing. The purpose of the filter fabric is to prevent dirt and debris from clogging the perforated drain tile.

At the base of the foundation wall, we will install Delta-Footing Barrier®, a capillary break, to prevent the wicking of moisture from the continuous concrete footing in to the foundation wall, that has the potential to wick up the wall and in to the home. The granular fill layer is not only a good bed for the concrete slab to set on to minimize movement and cracking, it also works allows any moisture to freely flow away from the slab in to the soil. The 6-mil polyethylene vapor barrier helps prevent any moisture from making contact with the concrete slab that could wick up and in to the home.

Designing for High Performance Foundation Detail

The Cellofoam PermaBG Expanded Polystyrene (EPS) foam board acts not only as a thermal and insect/termite barrier, it’s also acting as a vapor barrier for any moisture that may get in to the wall. Since we’re well protected at the outside and base of the wall, the foams primary function is for controlling heat flow (which is covered in Part II of this series). Finally, as a last line of defense, the continuous sill gasket (while also helping control air – Part II) will prevent the wicking of any unlikely moisture from the foundation wall in to the frame wall.

- Written by Chris Laumer-Giddens, Architect, HVAC Designer, Building Science Professional, Certified HERS Rater

Tags: controlling, design, efficient, energy, flow, grade, high, moisture, on, performance, More…slab

Views: 1254

Discussion Forum

Affordable Energy Efficient Design

Started by Dannie Jackson Nov 23, 2017. 0 Replies

Whats the Consensus of this group Define "Energy Efficiency"

Started by Barry NewDelman. Last reply by Dannie Jackson Nov 23, 2017. 2 Replies

No More "Damn Architects!" - The Case for Integrated Design

Started by Chris Laumer-Giddens. Last reply by Dennis Heidner Jan 16, 2014. 6 Replies

Energy Efficient Design for the not so rich

Started by James McGarvey. Last reply by Greg La Vardera Apr 11, 2013. 7 Replies

Latest Activity

Jonathan Nadle commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"Hi Jim, Thanks for your well thought-out and written piece.  I agree with your comments on…"
5 hours ago
Leo Klisch commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"WOW! 913kwh/12= 76kwh/month. How is that possible? I live in central Minnesota and started with…"
5 hours ago
Leslie Jackson replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Thanks Rich, I hope they thought of that, but you are on to something. I think I learn more doing…"
8 hours ago
grey staples commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"Curious to know how the kWh production turned out relative to what the installer indicated you…"
8 hours ago
Brennan Less commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"Hey Chris, y'all are kicking butt!! I'm sure your new HVAC won't use any energy,…"
8 hours ago
Rich Manning replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Have them call a HVAC contractor and install a filter system"
9 hours ago
Rich Manning replied to Jerry Needham's discussion Condensation on ceiling and walls of master bedroom
"Looks like a leaking ridge vent"
9 hours ago
Jonathan Nadle liked Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
9 hours ago
Matt Peterson posted a blog post

Gas Line Installation In Portland OR Code Basics

When you're looking to undertake any kind of a remodel or repair in your home it's important to…See More
9 hours ago
Brennan Less liked Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
9 hours ago
Pearl Home Certification posted a blog post

Press Release: HomeSmart International Joins the Pearl Broker Advantage Program

Vienna, Virginia and Scottsdale, Arizona – July 19, 2018 – Pearl Certification and HomeSmart…See More
10 hours ago
Franco Oyuela commented on Allison A. Bailes III's blog post The Ductopus or the Centipede - Which HVAC Duct System Is Better?
"Many older homes were constructed without air ducts. Ductless systems can provide much needed air…"
10 hours ago
Franco Oyuela commented on Chris Laumer-Giddens's blog post The Ductless Mini-Split Heat Pump's Big Brother - CITY MULTI
"The compact design and long piping system gives homeowners free reign for designing a ductless…"
10 hours ago
Terry Hill's event was featured

Passive House Institute US 2018 Conference at Boston

September 19, 2018 at 6pm to September 23, 2018 at 7pm
Annual conferenceSee More
10 hours ago
Franco Oyuela commented on Allison A. Bailes III's blog post How the Heck Does a Heat Pump Get Heat from Cold?!
"Like conventional central heat pumps, ductless mini-split heat pumps manipulate refrigerant to move…"
10 hours ago
Leslie Jackson replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Thanks, Larry! You are probably not confused! Apply skin, not a Band-Aid ... or something like…"
11 hours ago
Larry Weingarten replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Hello,  I'm probably confused, but I'd want to know where the dust and dirt are…"
11 hours ago
Diane Chojnowski posted discussions
12 hours ago
Leslie Jackson posted a discussion

DIY Filter Solution for an Evaporative Cooler, anyone?

If your general "info@" e-mail inbox is like mine, it is 95% SPAM but once in a while, as long as…See More
yesterday
Franco Oyuela commented on Silvie Votrubova's blog post Duct Testing Accuracy
"The ducts that are part of central heating and cooling systems offer one of the best opportunities…"
yesterday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service