What are inspectors using to detect the type of lighting found in residential applications? I need a meter to help detect CFL and LED lights so I don't have to get a ladder and remove shrouds.

Thanks.

Tags: CFL, light, lighting, meter, tools

Views: 115

Replies to This Discussion

If the question is "incandescent vs. compact fluorescent" OR "cfl vs. LED" -- then a diffraction grating will help. Go to a toy store and find the little cardboard glasses with plastic lenses that make every light bulb look like a rainbow.

See the attached handout. Incandescent lamps radiate across all visible wavelenghts, so in a diffraction grating you see a spectrum of colors all blended together. CFL's have 4, 5 or 6 phosphors blended together. The lamp makes light that we see as "white", but in fact each phosphor radiates at a very specific wavelength. Through a diffraction grating, you can see multiple images of the light source, each with the different color produced by that phosphor.

WHITE LEDs are doped to radiate across most of the visible spectrum. So a diffraction grating shows the same "smeared" continuous specturm as an incandescent bulb.

You can see this effect even if the lamp is in an enclosed luminaire -- the image of the luminaire will take on the property of the light source inside it.

So, in an older home that has not seen dedicated energy efficiency work recently, the question is probably "incandescent or CFL?" A diffraction grating will show the difference. In a home where the owner pursues energy savings, the question is probably "CFL or LED?" A diffraction grating will sort them out. If the space could well have incandescents AND LED lamps -- good luck.

Attachments:

RSS

Discussion Forum

Latest Activity

Profile IconAndrew McDowell, Randy Kinnison, Breanna Detwiler and 8 more joined Home Energy Pros Forum
3 hours ago
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
5 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Interesting idea. Commercial roof on a slope! Typical density for roofing spray foam is 2.5 to 3.0…"
6 hours ago
Summer Redman added a discussion to the group Job Board
Thumbnail

Hiring 2 Training Specialists in Champaign-Urbana, Illinois

The Applied Research Institute (ARI) at the University of Illinois at Urbana-Champaign is seeking…See More
7 hours ago
Summer Redman joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
7 hours ago
Stacie Bagnasco replied to Evan Mills's discussion Dirty solar panels
"This is a great idea. I clicked on your discussion because it made me remember that I forgot to get…"
12 hours ago
Kirsten Richnavsky posted an event
Thumbnail

rCloud - The Future of Testing at Your Office or Home

October 18, 2017 from 2pm to 3pm
Integrating rCloud as an essential part of your RESNET QA process.Retrotec’s rCloud app is here,…See More
12 hours ago
Ed Whitaker replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"Brad,   I agree with the comments and would add a couple of thoughts. 1st,  any time you…"
13 hours ago

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service