What are inspectors using to detect the type of lighting found in residential applications? I need a meter to help detect CFL and LED lights so I don't have to get a ladder and remove shrouds.

Thanks.

Tags: CFL, light, lighting, meter, tools

Views: 118

Replies to This Discussion

If the question is "incandescent vs. compact fluorescent" OR "cfl vs. LED" -- then a diffraction grating will help. Go to a toy store and find the little cardboard glasses with plastic lenses that make every light bulb look like a rainbow.

See the attached handout. Incandescent lamps radiate across all visible wavelenghts, so in a diffraction grating you see a spectrum of colors all blended together. CFL's have 4, 5 or 6 phosphors blended together. The lamp makes light that we see as "white", but in fact each phosphor radiates at a very specific wavelength. Through a diffraction grating, you can see multiple images of the light source, each with the different color produced by that phosphor.

WHITE LEDs are doped to radiate across most of the visible spectrum. So a diffraction grating shows the same "smeared" continuous specturm as an incandescent bulb.

You can see this effect even if the lamp is in an enclosed luminaire -- the image of the luminaire will take on the property of the light source inside it.

So, in an older home that has not seen dedicated energy efficiency work recently, the question is probably "incandescent or CFL?" A diffraction grating will show the difference. In a home where the owner pursues energy savings, the question is probably "CFL or LED?" A diffraction grating will sort them out. If the space could well have incandescents AND LED lamps -- good luck.

Attachments:

RSS

Latest Activity

Alfredo Baccari added a discussion to the group Job Board
Thumbnail

HERS or/and BPI Energy Inspector in SF Bay Area (SAN JOSE, CA).

ELEM3NTS is a leading energy efficient consulting company specializing in residential homes. We…See More
20 minutes ago
Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
1 hour ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
3 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
19 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
21 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
21 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
21 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service