These items were probably never used.  They sat in a Community College warehouse for 9 months, and had to be returned because of bureaucratic budget technicalities.  We sent the equipment back to The Energy Conservatory for inspection and recalibration.  Everything checked out fine.

Standard Model 3 Minneapolis Blower Door system which includes:

  • Fan with variable speed controller and fan control cable.
  • Two Flow Rings (A and B) and No Flow Plate.
  • DG-700 Pressure and Flow Gauge
  • TECTITE™ Building Airtightness Testing Software
  • USB cable - 16 feet (5 meters) long
  • Fabric door panel with viewing window.
  • Five piece adjustable aluminum door frame and frame case.
  • Padded attache case to hold gauge, manuals, tubing, speed controller, and fabric panel, with room for a laptop computer and other documents.

        Discounted price:  $2120.75 (ships anywhere in continental US for $45)


Minneapolis Duct Blaster Kit includes:

  • Duct Blaster Fan.
  • DG-700 Digital Pressure and Flow Gauge.
  • Three Flow Rings.
  • Twelve feet (3.7 m) of 10 in. (25 cm) diameter flex duct.
  • Heavy Duty Carrying Case.
  • Duct Blaster Training Video and Manual.
  • Static pressure probe.
  • Sample roll of 8” wide DuctMask™ Temporary Register Seal.

         Discounted price:  $1593.75  (ships anywhere in continental US for $25)

Call Tracy or Matt at 1-800-989-6686 for more details!

Tags: blower door, duct blaster, energy conservatory, equipment, used

Views: 4338

Replies to This Discussion

Please note both discounted units have been sold!

We do carry a full line of The Energy Conservatory products, and more, at great prices...Just give me a call!

Thanks,

Tracy

Conservation Strategies

1-800-989-6686

Are you still in operation, your 800 phone produces a "not in service at this time" response.

We are Matt and thanks so much for the heads up!  We have IT looking into it but in the meantime you should be able to reach me 804-612-3352

Tracy

RSS

Latest Activity

Diane Chojnowski replied to David Butler's discussion Beginners Guide: Managing Subscriptions on Home Energy Pros
"Thanks for your comprehensive guide, David! There is an RSS feed you can subscribe to at the…"
20 minutes ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
16 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
17 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
17 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
17 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
21 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
21 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
21 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service