Flir IR camera B400 Specs: (http://www.ivytools.com/FLIR-B400-Infrared-Camera-p/flir-b400.htm ). I’ve used it about 2 dozen times. SN: 395001 127.

 

I should have sold it years ago. Bought it for a little over $10,000 in February 2010. My home inspection business slowed way down after the housing crash. Thought I’d start doing Energy Audits. By the time I was done with training, my business picked back up. I no longer need an IR with all of these bells and whistles.

 

I’m asking $3,000 OBO. By the specs, you’ll see that it has great options including video, picture in a picture and 320x240 resolution. It has USB and USB mini connections. The specs mention Bluetooth and Wi-Fi streaming, but I’ve never used those features. I am including a third battery with the unit.

I had it installed with a wide angle lens for accommodating interior images.

 

Thanks for your consideration.

 

Donn Anderson

Anderson Home Inspection, llc

Serving SE WI since 1995

262.534.5075

Views: 147

Replies to This Discussion

Any pictures to show condition? Must you have $3000

I'd take $2,500.00 you pay shipping and insurance. It's truly in like-new condition. Always stored in the original box in a climate controlled location.

Attachments:

If i came up on my price how can i be sure it works with no issues? Sorry but i must ask. 

It's fine that you ask. We don't know each other so though I give you my word we probably both believe in "trust but verify". So I can come up with a few scenarios if you are interested but the best one of course would be for me to take it to the Flir distributor in Muskego and have them inspect it, maybe calibrate it and I could send you some documentation, but that means that I'd have to pay for that and then the price would go up and since I don't know you either we are at kind of a wash. So here goes: I started in the trades in 1965, been doing home inspections for over 22 years, member of ASHI, NACHI, you can check out my website on anspect.com to see some of my credentials. You can contact Cassidy Kuchenbecker, a Microbiologist/ Owner of Environmental Initiatives in Shorewood, WI. I sold him my blower door recently. Same scenario, I take care of the tools of my trade. He can also act as a character reference. Marcey Vescio is owner of Advance Radon Management in Pewaukee, WI. Same thing as far as character reference. I've known them both for about 20 years. I could make a video of me using the unit, down loading files and emailing them to you. If you have any better ideas, if you know anyone in the Milwaukee/ Southeastern WI area that you trust, I could take it to them and again do a video session of how it operates. Not sure if this helps, but I have more positive ratings on Angie's List than any other home inspector in the area. Let me know if you have an idea.

well know i feel like the kid getting on the bus the first time...lol. I appreciate your candor and bio. I myself have been in the trades since 1986. Not quite as long as you. i would agree to you having unit calibrated if calibration is needed. But i think i am willing to offer you the $2500.00 plus shipping & Insurance. How would you like to proceed?

Still interested in selling?

Yep, but I'll try to sell it locally so someone can see, feel and try it so there's no question as to the condition.

Thanks for your interest.

RSS

Discussion Forum

Latest Activity

David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
25 minutes ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
1 hour ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
1 hour ago
Keith Tripp replied to Sean Lintow Sr's discussion Water Saver or Gimmick? in the group Best Practices (Residential)
"Interesting to see that recirc. has been in use for many years in some places. It is still a…"
2 hours ago
Mahendra Shah replied to John Krochmalny's discussion Psychrometric Chart Training
"John Thanks for show and tell tutorial"
2 hours ago
Walter Money replied to David Butler's discussion How would you insulate this roof?
"Gentlemen, and ladies, So, as I read this, I see a perfectly good roof that works in serious…"
4 hours ago
tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Those are DIY install prices - not that cost is relevant now. If the goal is to go carbon free,…"
4 hours ago
Profile IconAndy Piercefield, Paigh Bumgarner, Blake Reid and 4 more joined Home Energy Pros Forum
5 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service