I have put together an Excel spreadsheet that calculates the temperature profile through a wall that is heated by the sun.

It use the matrix [K]{T} + [C]{dT/dt} = {S}, where [K] is the heat transfer, {T} is the temperature at the various nodes, [C] is the thermal capacitance of the node, and {S} is the thermal heat gain of the outer node. A copy of the spreadsheet and matrix math is attached.

The math equations have not been verified for accuracy or errors, but it is kind of fun to play around with the variables to see how the temperature profile in the wall changes throughout the day.

(Note that an earlier version of this post had the attached Excel file as a *.zip file.  It has been replaced with an Excel version.)

Tags: difference, element, finite, heat, transfer, transient

Views: 2133

Attachments:

Replies to This Discussion

Does this assume that all the heat the face is not leaving, or does it account for convetive currents on the face taking some heat away? Does it assume no wind? What boundry factors have you set up?

The spreadsheet calculates whether heat is going in or out.  Yes, it accounts for convective currents removing heat from the surface.  You can specify any interior or interior convective heat transfer coefficients or air temperatures that you want.  You can also specify the amount of solar gain that the wall receives based on the absorption coefficient.  A perfectly black surface would absorb all of the solar heat (Absorbtivity = 1.0) and a perfectly reflective surface would have zero absorbtivity. I used it recently to model the heat transfer in and out of cold storage rooms that is kept at 32F.

I'm working on an updated model that provides the thermal properties for different building materials and different convective heat transfer coefficients for wind, no wind, surface orientation etc. 

In addition to calculating the heat flow through walls, the spreadsheet could also be used to calculate how quickly the outside of your coffee cup would warm up after filling it with coffee.

This is a nice graphic.  I have a question on how you captured the data -- did you set temperature probes at increasing depths into the brick wall, or are these extrapolated from the delta between interior and exterior temperatures?  Thank you.

The values are all calculated for each node based on the physical characteristics that are input into the model.

To, Ti, hi and ho are inside and outside temperatures and convective heat transfer coefficients,

K is the Conductance (Conductivity/Thickness) of each layer

ρ is the layer's density, and

Cp is the specific heat of the material.

Attached is a detailed description of how I derived the calculations that are used in this transient heat transfer analysis.

Attachments:

RSS

Discussion Forum

Energy 2D and 3D

Started by James White. Last reply by James White Nov 6, 2014. 1 Reply

Transient Heat Transfer Analysis

Started by James White. Last reply by James White Dec 10, 2013. 5 Replies

How about simulation in the multifamily context?

Started by Evan Mills. Last reply by Don Hynek Jan 23, 2012. 6 Replies

Latest Activity

Lucyna de Barbaro liked David Eggleton's group 1000 Home Challenge
1 hour ago
Steven Lefler's photo was featured
2 hours ago
Brad Cook replied to Dav Camras's discussion Low Leakage home with cathedral ceiling
"It is all about the dewpoint. Think of the roof system as a big box. Air can circulate in, out and…"
4 hours ago
David Butler replied to Dav Camras's discussion Experience with new energy monitoring tools such as Curb, Sense, Nerio and Smapee
"@Dav, 240-volt circuits are dedicated to a single appliance so circuit monitoring with CT's…"
20 hours ago
Dav Camras replied to Dav Camras's discussion Experience with new energy monitoring tools such as Curb, Sense, Nerio and Smapee
"I have been thinking about putting it on my own home as you suggest, and was wondering which, if…"
20 hours ago
Profile IconGrady Harper, Christina Savage, gregory sutliff and 1 more joined Home Energy Pros Forum
21 hours ago
Doug Mullins added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Blower Door equipment for sale

I have 5 ea Retrotec 6000 blower door fans - $3500.00 ea1 3000 series fan with WiFi -…See More
21 hours ago
Jon Finewood joined Norm Bourassa's group
Thumbnail

Multifamily Buildings

For too long there has been relatively little EE focus on multifamily, but some new programs have…See More
21 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service