Come check out BPI's monthly newsletter, Performance Matters!

The image below was taken by Matt Schwoegler, a thermographer and infrared instructor with the Snell Group. Matt was on location in Vermont, helping to train a weatherization crew from the Champlain Valley Office of Economic Opportunity (CVOEO) which was already working on the home. The room in question was used by the homeowner as a three-season porch/bedroom. Matt explains that this portion of the home appeared to be an addition to the original structure, and was likely moved to the home's location where it was connected to the main house.

During the infrared training and building inspection, which was taking place in warm weather conditions, Matt found what appeared to be an insulation level on the wall in this room. While the ceiling appeared to be uninsulated, what was happening with the wall was not as clear.

So, what's wrong with this picture?

Tags: BPI, Chump, Newsletter, Stump, the

Views: 143

Replies to This Discussion

Key is this was done in warm weather. The back wall of the room was also uninsulated, but the lower portion was against the air-conditioned envelope of the home. The red area above was against the attic area, causing the increase in temperature.

Warm weather conditions is pretty relative and for Vermont 75 degrees F can easily be seen as warm weather, not to mention the fact that many VT homes don't use air conditioning. If the porch was an addon with an uninsulated roof then we can probably assume there are some air leaks causing cooler interior air to be drawn to the space from the opening to the house. If the main house has insulated exterior walls, which in VT I assume it does, than AC cooling is probably not the culprit or the cooler walls. If there is humidity from lack of a conditioning unit then the cedar walls are probably absorbing moisture and as the air moves along them, evaporation will cause the walls to cool. The hotter roof can easily be from solar radiation or a mini stack effect from the uninsulated and non vapor sealed roof. I do see a couple hotter spots on the side walls though, which leads me to believe that the temperature difference is purely solar radiation, and most parts of the exterior porch walls are shaded.

RSS

Latest Activity

David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Static pressure drop through a straight length of pipe is a function of friction rate, and friction…"
18 minutes ago
Sean Wiens replied to Don Fugler's discussion joining ducts in the group HVAC
"Apparently the air passing over the PVC creates a strong static field that in turn impedes air flow."
48 minutes ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Why would you think PVC has high resistance?"
53 minutes ago
Sean Wiens replied to Don Fugler's discussion joining ducts in the group HVAC
"Thanks David - I was going to look at PVC for the HRV but was cautioned against it, not because of…"
58 minutes ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Great post, Sean. I agree that screws are wise when joining metal ducts, but its also true that…"
1 hour ago
David Butler posted a discussion

Welcome Home Performance Forum Members (formerly RESNET BPI - Energy Audit and Home Performance)

Last month the Home Performance Forum merged with Home Energy Pros, now under the Home Performance…See More
2 hours ago
Sean Wiens replied to Don Fugler's discussion joining ducts in the group HVAC
"Various studies have indicated very little air flow along surface of duct (for ventilation - have…"
3 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don. We have never considered screws as impeding airflow, but I can see how in some ducts (e.g.…"
4 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service