This month's head scratcher comes from Ken Tohinaka of the Vermont Energy Investment Corporation in Burlington, Vermont.

Ken explains that recently, the owners of adjacent condo units in a Vermont condominium association banded together to address energy performance and building maintenance issues. Their problems were evidenced by excessive snow melt and dangling icicles. The condo owners employed an experienced Home Performance with ENERGY STAR® contractor to develop a suitable work scope, and to perform a retrofit to solve the problem. The work scope consisted of extensive air sealing in the attic, in addition to adding another six inches of insulation. Both projects were completed successfully.

While it is too soon to determine the extent of the energy savings, the owners realize that they can still see excessive snow melt and icicles. Ken asks, "why is there still excessive heat loss?"

Think you have what it takes to Stump the Chump? Submit your stumpers to mkandel@bpi.org for a chance to be featured in BPI's Performance Matters Newsletter!

Tags: BPI, CHUMP, STUMP, THE

Views: 75

Replies to This Discussion

No pictures???

It could be one, or several, of 100 reasons.  Without anything to look at, my first GUESS is that the common walls weren't properly sealed to stop heat loss to the attic.  That's a very common issue in my experience.

RSS

Discussion Forum

BPI is Hiring!

Started by Quinn Korzeniecki. Last reply by Diane Chojnowski Jun 29. 1 Reply

Latest Activity

Blake Shurtz posted a discussion

Replacement for Energy Conservatory Flow-blaster

It's too bad that the flow-blaster is no longer being produced or technically supported. Does…See More
7 hours ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
10 hours ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
13 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
yesterday
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service