Greetings everyone, 

    I have been asking around about this two classes... I want to be able to work with GeoThermal, and with Boiler /Furnace upgrades. I have no interest in AC -That been said, so far I know I need the BPI Air conditioning and Heat Pump if I want to work with Geo systems. So my question is, can I also do boilers /furnace upgrades with that same certification, or do I need to take the BPI Heating professional for that particular area of interest?

   Your help is greatly appreciated,

                                  Luis

Views: 248

Replies to This Discussion

Knowledge is one thing.  Certifications is another.  You need to know how HVAC systems work - distribution, efficiency, control - all that stuff no matter whether the source is oil or gas or electric or tempered water from the ground.  The BPI Heating certification focuses on the more conventional sources of conditioning such as oil and gas as well as the distribution and efficiency issues.  The AC/Heat Pump Professional focuses on cooling and the associated technologies such as coolants and compressors and coils.  The EPA 608 Refrigerant handling certification is required for working on AC systems.

BPI Certifications are not licenses.  A state may require BPI Certification for blower door or duct testing, but I have never known a state to require BPI Certification for working on heating or AC systems.

Luis,

As Paul says knowledge is always good . Certifications tend to be required for work in programs, whether through state or Utilities. Paul covered that, so depending on where you are and where your trying to achieve you need to check with the program personal or local governing body to answer the question properly. 

RSS

Latest Activity

Shawna Henderson posted a discussion

Exterior Insulation for Deep Energy Retrofits

Heya! I've been lurking for a while on the various formats that came together for the HEP Forum.…See More
1 hour ago
Dannie Jackson liked Allison A. Bailes III's group HVAC
yesterday
Dannie Jackson added a discussion to the group Energy Efficient Design
yesterday
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
yesterday
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
yesterday
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
yesterday
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
yesterday
Dannie Jackson posted a blog post
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service