Best Practices (Residential) Discussions (49)

← Back to Best Practices (Residential)
Featured Discussions

Duct Testing - is a change in order?

David Richardson posted an interesting piece on changing from % based testing based on conditioned floor area versus the duct area http://n…

Started by Sean Lintow SrLatest Reply

Blower Doors & Methods Used

Just curious - what Blower Door do you use, what tests do you do, and do you use software or not? For example it is a mixed bag here as som…

Started by Sean Lintow SrLatest Reply

Upgrading a vented tongue and groove cathedral ceiling

I'm looking for suggestions about how to upgrade a vented cathedral ceiling covered with very nicely finished (albeit leaky) tongue and gro…

Started by Matthew DamonLatest Reply

Discussions Replies Latest Activity

Water Saver or Gimmick?

ACI was an interesting conference with a lot of great vendors exhibiting, but one had me stumped. The company was called ShowerStart &…

Started by Sean Lintow Sr

23 Oct 20
Reply by Keith Tripp

Moisture/Mold on rim joist

In the cold Wisconsin winter we often see condensation behind fiberglass batt insulation on the rim joist. This is due to basement or crawl…

Started by John Shillito

11 Oct 12
Reply by Bob Krell

Radon - Passive Systems

Just curious - many locals (per codes) require passive radon systems be installed in new construction and even in certain remodels. There a…

Started by Sean Lintow Sr

5 Jan 5
Reply by Bryan Gabriel

Vented Soffit! DO or DON'T?

I am looking for any studies or research on vented soffits.  And, what is your opinion on the age old practice of venting a soffit? I pers…

Started by Daniel Baur-McGuire

13 Nov 15, 2016
Reply by Daniel Baur-McGuire

Duct Testing - is a change in order?

David Richardson posted an interesting piece on changing from % based testing based on conditioned floor area versus the duct area http://n…

Started by Sean Lintow Sr

20 Aug 6, 2015
Reply by Sean Lintow Sr

Blower Doors & Methods Used

Just curious - what Blower Door do you use, what tests do you do, and do you use software or not? For example it is a mixed bag here as som…

Started by Sean Lintow Sr

10 Aug 3, 2015
Reply by Colin Genge

Upgrading a vented tongue and groove cathedral ceiling

I'm looking for suggestions about how to upgrade a vented cathedral ceiling covered with very nicely finished (albeit leaky) tongue and gro…

Started by Matthew Damon

13 Nov 13, 2014
Reply by Matthew Damon

Subslab ventilation

Does subslab ventilation (Active Soil Depressurization) reduce basement humidity loads and what is the impact on electric loads? These were…

Started by Barbara Smith

1 Aug 12, 2014
Reply by Sean Lintow Sr

Thoughts on Employing Polyiso and UF FGB for Vented Cathedral Ceilings

I have been going with a relatively unique (and time-consuming) approach to address two similar situations: vented cathedral ceilings and s…

Started by Patrick Michaelyan

3 Feb 14, 2014
Reply by Sean Lintow Sr

Connected home refrigerators - are we excited?

A read-through of the revisions proposed for ENERGY STAR refrigerators (expected to take effect in March 2014) indicate that "connectivity"…

Started by Barbara Smith

18 Jul 30, 2013
Reply by Curt Kinder

RSS

Discussion Forum

Water Saver or Gimmick?

Started by Sean Lintow Sr. Last reply by Keith Tripp Oct 20. 23 Replies

Moisture/Mold on rim joist

Started by John Shillito. Last reply by Bob Krell Oct 12. 11 Replies

Radon - Passive Systems

Started by Sean Lintow Sr. Last reply by Bryan Gabriel Jan 5. 5 Replies

Vented Soffit! DO or DON'T?

Started by Daniel Baur-McGuire. Last reply by Daniel Baur-McGuire Nov 15, 2016. 13 Replies

Duct Testing - is a change in order?

Started by Sean Lintow Sr. Last reply by Sean Lintow Sr Aug 6, 2015. 20 Replies

Latest Activity

Daniel Cullen replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Can anyone tell me exactly HOW mold sampling impacts the mold remediation process or protocol? Why…"
2 minutes ago
Daniel Cullen joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
2 minutes ago
Debra Little's video was featured

Robert Bean, Iain Walker, indoor environmental quality experts

Robert and Iain discuss home indoor health & environmental quality. Design for human factors; thermal comfort, air quality, sound, odor...kitchen exhaust, th...
1 hour ago
Summer Reyes's blog post was featured

IAQ and Mold

What Is Mold?According…See More
1 hour ago
Dannie Jackson posted a group
Thumbnail

3D Design And Analysis

Here you can show off your 3D building designs, talk about design software, as well as energy…See More
2 hours ago
Profile IconKatherin Kale and Fred Schreiber joined Home Energy Pros Forum
2 hours ago
Shawna Henderson posted a discussion

Exterior Insulation for Deep Energy Retrofits

Heya! I've been lurking for a while on the various formats that came together for the HEP Forum.…See More
3 hours ago
Dannie Jackson liked Allison A. Bailes III's group HVAC
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service