In the cold Wisconsin winter we often see condensation behind fiberglass batt insulation on the rim joist. This is due to basement or crawlspace water vapor reaching the cold surface behind the fiberglass. Sometimes it has been chronic enough to cause mold.

Two-part SPF is a great way to eliminate it from happening. Okay, so what are your thoughts on spray foaming over the mold? Let's also assume it's middle of winter and the sawn lumber rim joist is noticeably wet behind the F.G. How important do you think it is to dry out the surface some first?

I've seen it done and intuitively I think it should work fine. Any mold is encapsulated and the material can dry to the outside when it warms up.

Tags: foam, joist, moisture, mold, rim, spray

Views: 805

Attachments:

Replies to This Discussion

I would scrape the black film and wipe up the moisture at a minimum. Why make the dry to the outside work harder? Why leave a thicker slimy film, or moisture film and attempt to make the SPF adhere to it.

Remove the FG -- heat the area for 24 - 48hours and remove moisture. Then see about the black. Then SPF. Heat to a good temp will also help do the SPF correctly.

Closed Cell I hope - beyond that, most manufacturers I know have specs for the temperature / moisture the surface being sprayed should be (not just the chemicals)

Many believe the isothermic reaction is enough to kill off mold cells but like John mentions I would scrape it all off after making sure everything is dried out. 

I'm not really concerned about the isothermic or other reaction killing spores, that is just a nice side effect.  The fungal growth needs water, food (wood) and spores.   Just like a fire needs heat fuel and air.  Remove one and the reaction stops.  In this case eliminate the water.  Same as you should be doing anytime you get a fungal growth.  

My main concern is having reasonably clean substrates for stuff to adhere to.  Like gluing a wood joint, the SPF has to adhere to something.  How clean?  Not clean like an operating room, or clean like the food prep counter in the kitchen.  Clean like your plate after you've eaten everything on it.

Try the easy things first; lower the humidity to attempt to lower the dew point at the rim, and maybe that will solve the problem.  If not:  I have developed an aversion to spray foam for various reasons, mainly the chemicals, since we already have too many of them in most of our homes.  So, my take would be to remove the FG, LET THE RIM DRY; forcing it to dry to the "outside" may force the moisture upward as well into the wall cavity, or the inside wall surface, then install rigid insulation with the R-value determined based on what's needed to prevent condensation at he design temps and the HUMIDITY LEVEL in the bsmt, (dew point app), and seal all edges with a "better" grade of caulk.  That is the design I use for my home, and we should treat every one as our own.

I THOUGHT I recognized that van!

Thanks guys for your excellent thoughts.
Re: scraping the surface. Just us a paint scraper I guess?

A putty knife or drywall blade would work.  Nothing aggressive like a paint scraper.  You have to get back in there.  So you might be using some type of handle extension. 

The problem is that when allowing moist ambient outside air to enter the rim box it meets with conditioned air and condensation starts. Same as walls.  Stop the air leakage and mold isn't allowed to flourish. This is best done with effectiveness and cost during the framing stage and NOT post frame with spray anything. Builders are not getting the message from building science so it will continue.  

Hi John, Looking at the photos and trying to figure out what is shown. I am thinking the first three photos the black that the fiberglass is stuck to is the backer material for the insulation, and the mold is shown in the fourth photo..982..only correct? 

I can't tell from the photos whether you have mold, but if you suspect mold do yourself a favor and don't simply scrape it off.  Removing mold from the moisture/food source will cause it to die, but dead mold spores are still a severe respiratory irritant, particularly to people who become sensitized.   Best to use HEPA vacuum and wear a respirator.  Also, you may want to spray with something like Concrobium mold control.   Bleach is very effective at killing mold but it's also quite caustic.  

Given the age of the post I would imagine you've already dealt with this, but perhaps the continued conversation will help others.  

We have seen numerous mold-related problems with the OSB portion of these manufactured joists. In more than one case we have found growth in the interior of a core sample, which strongly suggests that the product may carry the spores (contamination) right from manufacture.  Just add water, and...you have mold growth.

Ultimately, it seems that these "was-wood" products are very susceptible to mold growth if exposed to moisture--like when you leave a bundle of them outdoors during typical construction practices!

RSS

Discussion Forum

Water Saver or Gimmick?

Started by Sean Lintow Sr. Last reply by Keith Tripp Oct 20, 2017. 23 Replies

Moisture/Mold on rim joist

Started by John Shillito. Last reply by Bob Krell Oct 12, 2017. 11 Replies

Radon - Passive Systems

Started by Sean Lintow Sr. Last reply by Bryan Gabriel Jan 5, 2017. 5 Replies

Vented Soffit! DO or DON'T?

Started by Daniel Baur-McGuire. Last reply by Daniel Baur-McGuire Nov 15, 2016. 13 Replies

Duct Testing - is a change in order?

Started by Sean Lintow Sr. Last reply by Sean Lintow Sr Aug 6, 2015. 20 Replies

Latest Activity

Mark A. Moeller joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
Saturday
Franco Oyuela commented on John White's blog post HVAC Maintenance Checklist for Spring Cleaning
"As with a traditional air conditioner or heat pump, ductless mini splits require routine…"
Friday
NKaplan shared Quinn Korzeniecki's discussion on Facebook
Friday
Don Fugler replied to Tom Phillips's discussion Kitchen Ventilation Resources in the group Kitchen Ventilation
"Another good publication written for builders/renovators/HVAC professionals was Chris…"
Thursday
Robert Bean replied to Robert Bean's discussion Low velocity consequences in the group Kitchen Ventilation
"Hi Chris, Today there is no research that I can find to support less than 500 fpm. As I noted above…"
Thursday
Robert Bean replied to Robert Bean's discussion Low velocity consequences in the group Kitchen Ventilation
"Hi Tom, All good comments and questions that need to be explored for residential systems. We have…"
Thursday
Chris Stratton replied to Robert Bean's discussion Low velocity consequences in the group Kitchen Ventilation
"Seems like high velocity and low noise are at odds with each other. And one of the biggest…"
Thursday
Matt Sharpe replied to Bob Reuther's discussion log home roof insulation
"Agree that its hard to help without more information. Pictures? IR images? Do IR images show air…"
Thursday
Tom Phillips replied to Robert Bean's discussion Low velocity consequences in the group Kitchen Ventilation
"Bob: Good questions. I will defer to HVAC & grease experts on this. Is the main safety issue…"
Thursday
Bob Reuther replied to Bob Reuther's discussion log home roof insulation
"Thanks Brad.  You're correct on the missing info.  I do the customer service work…"
Thursday
Chris Stratton joined Don Fugler's group
Thumbnail

Kitchen Ventilation

In many homes, cooking is the largest indoor source of air pollutants. Exposures can be higher in…See More
Thursday
Home Performance Coalition posted a blog post

Advancing Home Energy Labeling through Data Standardization

Making energy efficiency features visible at the time of home sale is a strategy with…See More
Thursday
Brad Cook replied to Bob Reuther's discussion log home roof insulation
"This is like those BPI "Stump the Chump" problems where there is not enough information…"
Thursday
Brad Cook replied to Bob Reuther's discussion log home roof insulation
"This is like those BPI "Stump the Chump" problems where there is not enough information…"
Thursday
William H Nickerson replied to David Holtzclaw's discussion GSHP for domestic Hot water
"Hey David, My experience with my Econar 3.5 ton has been that the temps in the fall,winter spring…"
Thursday
Bob Krell's blog post was featured

IAQ + Energy =

Ellen Tohn Makes the Case for Adding Health to the Home EquationBy Susan Valenti Corliss…See More
Thursday
Jim Gunshinan's blog post was featured
Thursday
HomeWiz posted a video

See what makes HomeWiz the leading choice for electricians or hvac in the Boston area!

Whether you need same day service or rates up front our staff will give you the satisfaction and peace of mind you need!
Thursday
Jim Gunshinan posted a blog post
Wednesday
John C. Semmelhack replied to David Holtzclaw's discussion GSHP for domestic Hot water
"Mitsubishi has a refrigerant-to-water heat exchanger in their City-multi VRF lineup, but you have…"
Wednesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service