Patrick Michaelyan's Discussions (231)

Discussions Replied To (12) Replies Latest Activity

"Thanks for the reply Sean. I have been using 1" polyiso sleepers to achieve the 1"…"

Patrick Michaelyan replied Feb 14, 2014 to Thoughts on Employing Polyiso and UF FGB for Vented Cathedral Ceilings

3 Feb 14, 2014
Reply by Sean Lintow Sr

"Great, thanks Sean!"

Patrick Michaelyan replied Oct 2, 2012 to Exhaust Fan Venting - Bathroom, ERV, & HRV

34 Oct 10, 2012
Reply by Robert Riversong

"Sean, Forgive my ignorance, but what is a tensioner? The other brace is obscured i…"

Patrick Michaelyan replied Oct 2, 2012 to Exhaust Fan Venting - Bathroom, ERV, & HRV

34 Oct 10, 2012
Reply by Robert Riversong

"Here is my take on how to do a retrofit through the roof. Please advise…"

Patrick Michaelyan replied Sep 29, 2012 to Exhaust Fan Venting - Bathroom, ERV, & HRV

34 Oct 10, 2012
Reply by Robert Riversong

"Amen to that John!"

Patrick Michaelyan replied Sep 29, 2012 to Exhaust Fan Venting - Bathroom, ERV, & HRV

34 Oct 10, 2012
Reply by Robert Riversong

"Quite the question Sean. My take is this, vent exhaust fans through the roof (if ga…"

Patrick Michaelyan replied Sep 28, 2012 to Exhaust Fan Venting - Bathroom, ERV, & HRV

34 Oct 10, 2012
Reply by Robert Riversong

"Hello Sean and Bill. After reading what you two have posted, it still leaves me fee…"

Patrick Michaelyan replied Apr 2, 2012 to Drilling B-Vents

10 Apr 12, 2012
Reply by tedkidd

"I am curious to see where this thread goes. I have been through this before and neve…"

Patrick Michaelyan replied Apr 2, 2012 to Drilling B-Vents

10 Apr 12, 2012
Reply by tedkidd

"Paul, just make sure your subs understand that any attic should be thoroughly air se…"

Patrick Michaelyan replied Mar 2, 2012 to Blown fiberglass vs. cellulose

22 Sep 5, 2012
Reply by Robert Riversong

"I'll accept Pat's answer. The tough part is determining the right combinations, and…"

Patrick Michaelyan replied Mar 1, 2012 to Blown fiberglass vs. cellulose

22 Sep 5, 2012
Reply by Robert Riversong

RSS

Discussion Forum

Water Saver or Gimmick?

Started by Sean Lintow Sr. Last reply by Keith Tripp yesterday. 23 Replies

Moisture/Mold on rim joist

Started by John Shillito. Last reply by Bob Krell Oct 12. 11 Replies

Radon - Passive Systems

Started by Sean Lintow Sr. Last reply by Bryan Gabriel Jan 5. 5 Replies

Vented Soffit! DO or DON'T?

Started by Daniel Baur-McGuire. Last reply by Daniel Baur-McGuire Nov 15, 2016. 13 Replies

Duct Testing - is a change in order?

Started by Sean Lintow Sr. Last reply by Sean Lintow Sr Aug 6, 2015. 20 Replies

Latest Activity

tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Yeah. Gas water…"
18 hours ago
Eric Kjelshus replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"With super cheap natural gas prices now, still worth going all electric?  Tankless needs a lot…"
19 hours ago
Stuart Langley liked Chris Clay's photo
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service