John Nicholas's Discussions (180)

Discussions Replied To (34) Replies Latest Activity

"A putty knife or drywall blade would work.  Nothing aggressive like a paint scraper.…"

John Nicholas replied Jan 10 to Moisture/Mold on rim joist

11 Oct 12
Reply by Bob Krell

"I'm not really concerned about the isothermic or other reaction killing spores, that…"

John Nicholas replied Jan 5 to Moisture/Mold on rim joist

11 Oct 12
Reply by Bob Krell

"I would scrape the black film and wipe up the moisture at a minimum. Why make the dr…"

John Nicholas replied Jan 5 to Moisture/Mold on rim joist

11 Oct 12
Reply by Bob Krell

"The actual research is limited to some work by Frank Rowley at the University of Min…"

John Nicholas replied Oct 12, 2016 to Vented Soffit! DO or DON'T?

13 Nov 15, 2016
Reply by Daniel Baur-McGuire

"In day to day operation, the blower is the source of pressure in the supply system a…"

John Nicholas replied Aug 5, 2015 to Duct Testing - is a change in order?

20 Aug 6, 2015
Reply by Sean Lintow Sr

"Yes,  I was connected to the AH cabinet.  I find it easier in this area, given the c…"

John Nicholas replied Aug 3, 2015 to Duct Testing - is a change in order?

20 Aug 6, 2015
Reply by Sean Lintow Sr

"Different houses, different problems, different approaches. A multipoint gives you a…"

John Nicholas replied Jan 25, 2015 to Blower Doors & Methods Used

10 Aug 3, 2015
Reply by Colin Genge

"Bud,  I pretty much agree with Sean's points.  Given the time it takes to set up the…"

John Nicholas replied Jan 25, 2015 to Blower Doors & Methods Used

10 Aug 3, 2015
Reply by Colin Genge

"I use Energy Conservatory Equipment.  I do manual Multi-point tests (95%) Then I man…"

John Nicholas replied Jan 22, 2015 to Blower Doors & Methods Used

10 Aug 3, 2015
Reply by Colin Genge

"Maria, each house is different. Most people do not have a DHW 6 inches from the show…"

John Nicholas replied May 8, 2014 to Water Saver or Gimmick?

22 on Friday
Reply by David Butler

RSS

Discussion Forum

Water Saver or Gimmick?

Started by Sean Lintow Sr. Last reply by David Butler on Friday. 22 Replies

Moisture/Mold on rim joist

Started by John Shillito. Last reply by Bob Krell Oct 12. 11 Replies

Radon - Passive Systems

Started by Sean Lintow Sr. Last reply by Bryan Gabriel Jan 5. 5 Replies

Vented Soffit! DO or DON'T?

Started by Daniel Baur-McGuire. Last reply by Daniel Baur-McGuire Nov 15, 2016. 13 Replies

Duct Testing - is a change in order?

Started by Sean Lintow Sr. Last reply by Sean Lintow Sr Aug 6, 2015. 20 Replies

Latest Activity

B Eric Bell liked Bob Krell's group Healthy Indoors (IAQ)
2 hours ago
John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
5 hours ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
6 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
11 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
11 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
Monday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Interesting idea. Commercial roof on a slope! Typical density for roofing spray foam is 2.5 to 3.0…"
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service