Actual Energy Use - 20 Thousand Home Challenge Projects & 20th Project to Meet 1000 Home Challenge

We just approved the 20th Thousand Home Challenge project! Congratulations to Ruth von Goeler and Kelly Slough of Northampton, MA. They participated in National Grid’s Deep Energy Retrofit pilot in 2012. Their OPTION B threshold was 13,071 kWh (OPTION B inputs - fossil fuel heat, 4 in household, 3,208 FFA, and 6,208 HDD (base 65). Andrew Webster of Coldham & Hartman Architects was the project manager.

 

Their annual energy for the post retrofit monitoring period was 8,136 kWh. Their 110-year-old home was previously insulated and had a relatively efficient heating system. As part of the retrofit they substantially increased the finished floor area and still achieved a 61% reduction in energy use from their baseline. 

 

Attached is a spreadsheet with data from our twenty completed projects. 

 

Interesting numbers, ranges, means, and comparisons!  I welcome your observations. What is most interesting from the attached spreadsheet?  Please provide suggestions for charts and graphs to tell the story of the 1000 Home Challenge projects to date.

 

ENERGY PERFORMANCE[1]

6.9 kBtu/ Ft2:  Avg Energy Use Index (EUI)[2]; US National avg. 44.8 kBtu/ Ft2 (single family homes)

1.91 kWh/ Ft2: Avg. THC Whole House Energy Use; US National Avg.: 14.27 Ft2

(5) Net Zero or Better

(3) Also charge Electric Vehicles

1,709 kWh/year: Average Energy Use per Occupant

4,554 kWh Average project energy use; 31,389 US National Avg: 31,389 kWh/yr

8,108 kWh Average project Thousand Home Challenge threshold

 

USE OF PV

(17) Homes have PV; (8 of 20) Projects met the Thousand Home Challenge without PV

(93 kW) Total installed PV Capacity (17 homes)

 

HOUSE & HOUSEHOLD CHARACTERISTICS

1869 Oldest home; 2008 Newest home

Year Built: (20%) 1850-1899; (25%) 1900-1930; (15%) 1931-1960; (30%) 1961-2000; (10%) 2001-2010

Correlation between indicators of energy performance and age: None

576 Ft2 Smallest home; 3,208 Ft2 Biggest single family home

2,271 Ft2 Average house size (per household)

1.73 Occupants: Average household size

(18) Single-family homes; (2) Duplexes


[1] Energy use is site energy, total household energy; house size is finished floor area (FFA)

 

[2] This is an average from the 20 projects, not the average energy use for the total square feet of all projects

Tags: 20th, Challenge, Deep, EUI, Energy, Existing, Home, Project, Reductions, Retrofits, More…Thousand, Use

Views: 1213

Attachments:

Replies to This Discussion

The attached bar chart shows EUI (Energy Use Index)  of our 20 completed projects. 

As stated above the average for the first 20 projects is 6.9 KBtu/ft2; national average for single family homes is 44.8 KBtu/ft2.

This chart also provides an indication of project cost (H - High, M - Medium, and L - Low). You do not necessarily  need to do a complete deep energy retrofit of a home to achieve a deep energy reduction in energy costs. However, as with the Sloan/von Gouler project, the value proposition of a deep energy retrofit goes way beyond lower energy costs. 

Attachments:

Here is the link to Coldman & Hartman's post regarding the Sloan/von Goeler home  on http://www.coldhamandhartman.com/news.php?id=99

Here is a photo of the completed project.

Thanks Linda.  What I found interesting about the spreadsheet data you've shared is that it shows that achieving DER is possible with any age of house with or without PV with varying amount of investment. This means a homeowner can be creative in their path towards DER as long as there is commitment and focus.  Good news!

We are THC candidate and have few more months to billing data to collect to complete the first year of occupancy.  The monthly average on our our energy bill has been 279 kWh/month for the past 8 months.  We'll see how this passive house performs in the winter months. 

You can do it, Chie!  What's your yearly kWh THC threshold?  Unless it's really low, it sounds like you're on track.

Thanks Chris!  Our Option B threshold is 5331.  We have solar thermal but no PV (yet) and we would be delighted to meet the THC threshold without PV.

Chie - 

What is your gas usage to date?  Is the 279 kWh just your electric use, or does it reflect gas and electricity? As I recall, you use electricity for the clothes dryer and cooking, and gas for water and space heating, correct?

I have really enjoyed your blog. Please add the link to it for folks who may want more info about your project.

Hi Linda, the 279 kWh/month average includes both gas and electricity.  We've been having a bit of a cold snap here and the sun isn't shining as much, so our backup gas boiler is kicking on every day.  We moved into the house in mid-March so we have a few more months of data gathering and I'm curious how much gas we'll end up using.  

Here's the link to my blog:  http://midorihaus.blogspot.com/

Lastest post is on solar thermal system.  Enjoy!

Chie - 

Impressively low usage! Thanks for the update, and the link to your blog.

I just spent some time on Chie's midorihaus blog, describing the progress of engaging in a deep energy reduction project of their home. Lots of great, useful info! Check it out and I think you will agree.

I must say, I'm not a fan of EUI as an energy performance metric (for residential buildings, at least), because it rewards larger houses, and doesn't penalize larger aggregate absolute energy consumption.  Energy consumption per house or per occupant are better metrics, in my mind.
I would also like to see a greater differentiation made between energy consumption and on-site energy generation.  Though from a carbon emissions standpoint, grid (fossil fuel derived) energy consumption reduction through renewable on-site generation is equivalent to reduction through conservation, so I see the logic.  But still. Not using energy, and using energy generated on-site are not the same thing.
Maybe one thing to add to the spreadsheet or graphs could be the carbon emissions from the homes, along with that of the typical US home?

Thanks for all that you do.  Great to see the THC Home Energy Pros page lively again!

Chris - 

I share your concerns about using EUI as a metric. Any metric that is based on square footage of living space favors bigger buildings and penalizes smaller buildings. 

I envision that we need a constellation of metrics to tell the story of a home's or an initiative's energy performance. It was only recently that I worked the THC OPTION B allowance backwards to see what the range of EUI would be for different climates, house sizes, and occupancy. 

OPTION B of the 1000 Home Challenge generates a threshold that balances a number of inputs, and only uses finished floor area in order to estimate shell surface area (five sides). Below is a graphs that I find interesting. Hopefully, as a result, the OPTION B allowance meets the objective of being difficult to achieve across the full range of North American housing stock - ideally not favoring warm climates, cold climates, big homes, small homes, old homes, new homes, energy hogs or energy misers, homes serviced by low carbon electricity, or homes serviced by hydro. 

The Option B criteria themselves do an excellent (heroic, beautiful, gold-standard -- what other superlatives can I think of?) job at controlling for all the factors you cite, normalizing the difficulty for homes having different occupancies, behaviors, climate zones, heating types, etc. But then in the end to subvert all that innovative, clear thinking by comparing performance using EUI -- seems strange.  I understand the rationale -- it's a commonly-cited and broadly-understood metric. But then again, hey, whatever it takes; if EUI motivates and engages people and is not used in the certification process itself (but only after the fact), I'm all for it.  

RSS

Latest Activity

Sean Wiens posted a discussion

Outdoor Reset

Can some of you weigh in on what you feel is the best wired outdoor reset and why?  I am currently…See More
20 hours ago
Tom Phillips replied to Don Fugler's discussion Choosing a range hood in the group Kitchen Ventilation
"thx Don! re: Capture Efficiency, the ROÇIS Kitchen Range Hood document addresses what hood…"
yesterday
Dara Bowser joined Don Fugler's group
Thumbnail

Kitchen Ventilation

In many homes, cooking is the largest indoor source of air pollutants. Exposures can be higher in…See More
yesterday
Dara Bowser liked Don Fugler's discussion Choosing a range hood
yesterday
Profile IconChris Hawkins and Drew Brauer joined Home Energy Pros Forum
Saturday
Profile IconLauren Asplen and Danny Gough joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
Friday
Franco Oyuela commented on John White's blog post What to Expect from a New HVAC Unit Installation Cost
"Is strongly advise against attempting to install any complex home comfort equipment on your own.…"
Friday
CEE posted a blog post
Friday
Lindsay Bachman liked David Keefe's video
Friday
Julie Saporito's blog post was featured
Friday
John C. Semmelhack liked Diane Chojnowski's discussion Everything you need to know about California's new solar roof mandate
Friday
Profile IconJohn Walter and Eric Rabesa joined Home Energy Pros Forum
Thursday
William Collins posted a video

The Foam Sealants Kit " Bead or Spray"

Now you can apply foam sealant as a " bead " or a " spray " with the Foam Sealants Kit. When using a 16lb Canister of Black Sealant you can easily go from us...
Thursday
Profile IconSean Wiens and Armando Cobo joined Don Fugler's group
Thumbnail

Kitchen Ventilation

In many homes, cooking is the largest indoor source of air pollutants. Exposures can be higher in…See More
Thursday
Julie Saporito posted a blog post
Thursday
Brennan Less replied to Linda Wigington's discussion Good Eating with Reduced Cooking Emissions in the group Kitchen Ventilation
"Cook outside, as much as you can, and close your doors/windows while you do it ;) "
Thursday
Ethan Foley joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
Thursday
Shane S posted a photo
Thursday
Al Tibbs posted photos
Wednesday
Al Tibbs commented on Eric Aune's photo
Thumbnail

IMG00173-20100805-1030

"Always remind customer to make sure to mark out location of piping before covering!! The infrared…"
Wednesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service