Welcome to the Forum (1,188)

Discussions Replies Latest Activity

Are you going to ACI in Denver? If so, what is on your Don't-Miss list?

Here's a list of things I want to see, people that YOU should meet, and several activities or sessions you should try to attend: http://oms…

Started by Mike Rogers in General Forum

1 Apr 26, 2013
Reply by Joe Romero

Stump the Chump - March 2013

This month's stump the chump comes from a mystery contributor, a caped crusading building performance specialist from Burlington, Vermont.…

Started by Mike Kandel in General Forum

10 Apr 25, 2013
Reply by David Eakin

New PV system. What is your experience with different panel manufacturers?

I am about to pull the trigger on having a 5.9kW system put on our home/office, but honestly PV systems are kind of outside of my realm of…

Started by Jason Raddenbach in General Forum

12 Apr 25, 2013
Reply by Jason Raddenbach

Air Source Heat Pumps Question from Colorado

One of our readers asked us this question - we'd love any feedback you have: For the climate in Denver, do air source heat pumps with natur…

Started by Home Energy Magazine in General Forum

6 Apr 25, 2013
Reply by Jose Macho

Geothermal real-world performance

I've heard that measured performance of actual, installed geoexchange systems can be much lower than advertized COP numbers. Is anyone awar…

Started by Doug Horgan in HVAC

32 Apr 19, 2013
Reply by Terry D. Davenport

Looking for a cure for a warping hardwood floor not caused by a leak

I have a client who is has a lovely house built in 2010 that has oak hardwood floors throughout. There are apparently no other moisture iss…

Started by Paul Raymer in General Forum

17 Apr 18, 2013
Reply by Ed Minch

Energy Myths- Fact or Fiction?

MYTH: Closing off vents and registers will reduce your heating bill.False. If you have a modern forced air heating system, the pressure loa…

Started by Tom DelConte in General Forum

8 Apr 15, 2013
Reply by Bob Blanchette

Backup Power for Pump on Radiant Heat System

A friend of mine in Traverse City asked about options for powering a pump on his home's radiant heat system. During an extended power outag…

Started by Nick Helmholdt in General Forum

6 Apr 11, 2013
Reply by Dennis Heidner

Enforcement_Policy_Furnace

http://energy.gov/sites/prod/files/2013/04/f0/Enforcement_Policy_Furnace_Stds_04052013.pdf 80% will still be illegible in north 30 states b…

Started by Eric Kjelshus in General Forum

4 Apr 11, 2013
Reply by Eric Kjelshus

Basements and BAS

I frequently find that if I include basement area and volume in a BPI calculation for Building Airflow Standard then relatively high flow r…

Started by Pat Dundon in General Forum

16 Apr 11, 2013
Reply by Pat Dundon

RSS

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
3 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
4 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
4 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
4 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
8 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
8 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
8 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
17 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service