The L-shaped probe grew legs, so this was improvised with a straight metal tube. There seems to be a persistent notion that angling the probe toward the appliance (into the exhaust stream) is the correct technique, but wouldn't this result in interference from ram air pressure of the rising flue gases?

Tags: CAS, CAZ, analysis, combustion, draft, pitot, safety, spillage, tube

Views: 835

Reply to This

Replies to This Discussion

Ted, I see your point now. Thanks for clarifying. The CAZ pressure was recorded independly of the draft. I haven't seen anyone measure both results simultaneously on one manometer, but that is a really good way to illustrate the interaction between the two forces.
... and one of the things that makes dg700 such a cool tool.

When testing draft, using the straight probe will be a close approximation of static pressure because the velocity is so low.  You should have the end of the probe close to the center of the vent and at a 90 degree angle to the pipe. 

Forget the draft measurement issue,,, just look at that incorrectly applied pipe wrap next to the flue.. Surprised it hasn't melted yet. Anyway,,, many who follow the 1200 standard simply test draft using a smoke pen or some visible indication (yes a mirror does work) of proper draft. The old BPI rule of outside temp and draft pressure failure made no sense at all when we could visibly see it drafting under worst case conditions.. 

I agree that checking for combustion spillage is more important that checking for draft.  It is possible to have high draft pressures and spillage at the same time.  For example, if a 75,000 BTU water heater is vented with a 3" pipe, you will have high draft pressure and spillage at the same time.

RSS

Latest Activity

Chris Stratton commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"@ Jonathan 1. Cost of PV array was about $15k before 30% federal tax credit. 2. The financial…"
1 hour ago
Chris Stratton commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"@ Brennan Hey thanks! Yeah, it's time for an update on the energy consumption now that…"
1 hour ago
Chris Stratton commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"@Grey re: estimated vs. actual production Good question! The estimated first-year annual production…"
1 hour ago
Diane Chojnowski's video was featured

People Who Save Energy 1: Builders

Millions of people work to save energy in the United States. They work in every state, across industries and technologies. To show the diverse arc of this growing workforce, we visited North Carolina. This video tells the stories of some of these…
3 hours ago
Jonathan Nadle commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"Hi Jim, Thanks for your well thought-out and written piece.  I agree with your comments on…"
20 hours ago
Leo Klisch commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"WOW! 913kwh/12= 76kwh/month. How is that possible? I live in central Minnesota and started with…"
20 hours ago
Leslie Jackson replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Thanks Rich, I hope they thought of that, but you are on to something. I think I learn more doing…"
23 hours ago
grey staples commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"Curious to know how the kWh production turned out relative to what the installer indicated you…"
yesterday
Brennan Less commented on Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
"Hey Chris, y'all are kicking butt!! I'm sure your new HVAC won't use any energy,…"
yesterday
Rich Manning replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Have them call a HVAC contractor and install a filter system"
yesterday
Rich Manning replied to Jerry Needham's discussion Condensation on ceiling and walls of master bedroom
"Looks like a leaking ridge vent"
yesterday
Jonathan Nadle liked Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
yesterday
Matt Peterson posted a blog post

Gas Line Installation In Portland OR Code Basics

When you're looking to undertake any kind of a remodel or repair in your home it's important to…See More
yesterday
Brennan Less liked Jim Gunshinan's blog post Our First Year with Solar Panels, by Chris Stratton
yesterday
Pearl Home Certification posted a blog post

Press Release: HomeSmart International Joins the Pearl Broker Advantage Program

Vienna, Virginia and Scottsdale, Arizona – July 19, 2018 – Pearl Certification and HomeSmart…See More
yesterday
Franco Oyuela commented on Allison A. Bailes III's blog post The Ductopus or the Centipede - Which HVAC Duct System Is Better?
"Many older homes were constructed without air ducts. Ductless systems can provide much needed air…"
yesterday
Franco Oyuela commented on Chris Laumer-Giddens's blog post The Ductless Mini-Split Heat Pump's Big Brother - CITY MULTI
"The compact design and long piping system gives homeowners free reign for designing a ductless…"
yesterday
Terry Hill's event was featured

Passive House Institute US 2018 Conference at Boston

September 19, 2018 at 6pm to September 23, 2018 at 7pm
Annual conferenceSee More
yesterday
Franco Oyuela commented on Allison A. Bailes III's blog post How the Heck Does a Heat Pump Get Heat from Cold?!
"Like conventional central heat pumps, ductless mini-split heat pumps manipulate refrigerant to move…"
yesterday
Leslie Jackson replied to Leslie Jackson's discussion DIY Filter Solution for an Evaporative Cooler, anyone?
"Thanks, Larry! You are probably not confused! Apply skin, not a Band-Aid ... or something like…"
yesterday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service