I'm trying to figure out what level of attic, wall, basement wall insulation levels were required by the different code versions over the years. If you know of a table of this type of info I would find it useful to have. Or if you have the knowledge to help me build this table your help would be appreciated. The table would look something like:

                                                    R-Value required in:

                      |  ---------------------------------------------------------------------------------------------

Year of Code   |  Attic     Walls     Basement Walls     Crawlspace ceiling      Etc.

----------------------|------------------------------------------------------------------------------------------------

2015               |

2012

2009                                Filled in R-values for various locations

2006

2003

2000

1997

1994

...

1970's

...

1960's

etc.

Thanks in advance for any help!

-Martin

Tags: code, insulation, r-value

Views: 272

Reply to This

Replies to This Discussion

Hi Martin, that's a tough question.  It is tough enough to determine which of the more recent codes any jurisdiction is following.  Here in Maine they only recently adopted a state wide code program and even that has its exemptions.  I could probably go down to my local code office and with some effort come up with a paper trail for what we have been following over the years.  But that would have little relevance to other towns or states.

Can you share your objective?

Bud

Yes, finding out when codes were adopted in every municipality would be very hard. But filling out this table shouldn't be that bad. The reason I want to do this is to be able to have an idea of what insulation is in a home just by finding out the year it was built. I could figure out when the codes were adopted in the areas around Denver with a little effort too. This will help with marketing efforts because the energy company here is offering rebates on insulation if the home has R-19 or less, but no rebate if it had more. So when targeting homes that had R-19 originally I can talk to them about rebates, but not the newer homes. Make sense?

http://thehtrc.com/2014/first-look-upcoming-codes-changes has the national 2006 to 2015 tables (no changes between the 12 & 15) FYI - I don't think there was a change between 03 & 06 but I am not positive on that

There are a few free online code resources to research past values

Thanks! I've got 2006-15 filled in now. Can you tell me where on the web those free code resources are? I found some for the newer codes but I haven't found them for 2003 and earlier. Thanks.

Looks like the ICC cracked down on a few sites - one I still see (but have never used) https://archive.org/details/publicsafetycode

Martin, What the code required at a certain time and what the builder did are two separate issues.  Not until recently did you start to see real enforcement of the energy code.  There was no code prior to 1975 and what was used from '75 to 1986 was MEC, a very light duty idea of energy efficiency. 

Martin,

Local building code R-Value building requirement knowledge is a challenge

Here is what I know.
HUD code homes since 1998 was by split into 3 Zones for the USA see attachment

Insulation Manufactures would be your best resource. The R-Value they could produce for batts for those time periods
Zone I = R-11, R-19/R-20
Zone II = R-11/R-22/R-25
Zone III =R-19/R22/R-25

Current CA local building codes are listed on the attachments. Climate zone determines specific requirements for R-value for residential homes. The mandate is proven Net Zero for 2020 for residential homes before the sale.

This is the best I can offer you

Attachments:

Thanks for your reply Steven.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 24 minutes ago. 13 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah 2 hours ago. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
24 minutes ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
1 hour ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
1 hour ago
Keith Tripp replied to Sean Lintow Sr's discussion Water Saver or Gimmick? in the group Best Practices (Residential)
"Interesting to see that recirc. has been in use for many years in some places. It is still a…"
2 hours ago
Mahendra Shah replied to John Krochmalny's discussion Psychrometric Chart Training
"John Thanks for show and tell tutorial"
2 hours ago
Walter Money replied to David Butler's discussion How would you insulate this roof?
"Gentlemen, and ladies, So, as I read this, I see a perfectly good roof that works in serious…"
4 hours ago
tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Those are DIY install prices - not that cost is relevant now. If the goal is to go carbon free,…"
4 hours ago
Profile IconAndy Piercefield, Paigh Bumgarner, Blake Reid and 4 more joined Home Energy Pros Forum
5 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service