I'm trying to figure out what level of attic, wall, basement wall insulation levels were required by the different code versions over the years. If you know of a table of this type of info I would find it useful to have. Or if you have the knowledge to help me build this table your help would be appreciated. The table would look something like:

                                                    R-Value required in:

                      |  ---------------------------------------------------------------------------------------------

Year of Code   |  Attic     Walls     Basement Walls     Crawlspace ceiling      Etc.

----------------------|------------------------------------------------------------------------------------------------

2015               |

2012

2009                                Filled in R-values for various locations

2006

2003

2000

1997

1994

...

1970's

...

1960's

etc.

Thanks in advance for any help!

-Martin

Tags: code, insulation, r-value

Views: 272

Reply to This

Replies to This Discussion

Hi Martin, that's a tough question.  It is tough enough to determine which of the more recent codes any jurisdiction is following.  Here in Maine they only recently adopted a state wide code program and even that has its exemptions.  I could probably go down to my local code office and with some effort come up with a paper trail for what we have been following over the years.  But that would have little relevance to other towns or states.

Can you share your objective?

Bud

Yes, finding out when codes were adopted in every municipality would be very hard. But filling out this table shouldn't be that bad. The reason I want to do this is to be able to have an idea of what insulation is in a home just by finding out the year it was built. I could figure out when the codes were adopted in the areas around Denver with a little effort too. This will help with marketing efforts because the energy company here is offering rebates on insulation if the home has R-19 or less, but no rebate if it had more. So when targeting homes that had R-19 originally I can talk to them about rebates, but not the newer homes. Make sense?

http://thehtrc.com/2014/first-look-upcoming-codes-changes has the national 2006 to 2015 tables (no changes between the 12 & 15) FYI - I don't think there was a change between 03 & 06 but I am not positive on that

There are a few free online code resources to research past values

Thanks! I've got 2006-15 filled in now. Can you tell me where on the web those free code resources are? I found some for the newer codes but I haven't found them for 2003 and earlier. Thanks.

Looks like the ICC cracked down on a few sites - one I still see (but have never used) https://archive.org/details/publicsafetycode

Martin, What the code required at a certain time and what the builder did are two separate issues.  Not until recently did you start to see real enforcement of the energy code.  There was no code prior to 1975 and what was used from '75 to 1986 was MEC, a very light duty idea of energy efficiency. 

Martin,

Local building code R-Value building requirement knowledge is a challenge

Here is what I know.
HUD code homes since 1998 was by split into 3 Zones for the USA see attachment

Insulation Manufactures would be your best resource. The R-Value they could produce for batts for those time periods
Zone I = R-11, R-19/R-20
Zone II = R-11/R-22/R-25
Zone III =R-19/R22/R-25

Current CA local building codes are listed on the attachments. Climate zone determines specific requirements for R-value for residential homes. The mandate is proven Net Zero for 2020 for residential homes before the sale.

This is the best I can offer you

Attachments:

Thanks for your reply Steven.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Brad Cook 25 minutes ago. 27 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco Oct 16. 1 Reply

Latest Activity

Brad Cook replied to David Butler's discussion How would you insulate this roof?
"Bill, you just posted a number of responses in different areas of the thread. I will try to respond…"
25 minutes ago
Donald Hester liked Marc Tannenbaum's blog post 3 Issues HVAC contractors Should Know About Impacting Customer Comfort and Health
27 minutes ago
Profile IconAlice Quinn and Donald Hester joined Home Energy Pros Forum
38 minutes ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"In an earlier response, I noted that we COULD haul drinking water and use the water we collect off…"
58 minutes ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"As to the elevations on the cupola – the existing windows up there might survive adding…"
1 hour ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I believe the top chord of the trusses are 10" deep (but…"
1 hour ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The cupola windows are the only place there would be a problem if 4" of foam were added above…"
1 hour ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I don’t know about the fire dangers of PIC or other foams.…"
1 hour ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service