Does anyone else just see a lawsuit when they watch this video?

http://www.trustedhomeservices.com/eshield/video.asp

Views: 7064

Reply to This

Replies to This Discussion

Unbelievable. With all their money you'd think they would buy a clue.

That is pretty incredible.If they have the kind of air leakage into the attic implied by their ice dam problems I expect condensation and associated issues.

It sounds like Costco isn't getting top grades for this service, even from friends: http://addictedtocostco.com/2008/10/07/have-you-used-costco-service...

Does anybody know how much this job may have cost-installed?

I want to know how they got inside Joe Lstiburek's attic.

LOL, the only thing joe would let these guys touching his house is the door knob to get out the front door!

They make a curious claim about "Almost all of the energy lost in your home is through emission (radiant heat transfer).".. as opposed to convection and conduction.  Seems a bit over the top. 

 

http://www.trustedhomeservices.com/eshield/energy-barrier.asp

 

 Maybe if you lived in a well sealed glass house....

 

Kevin

Even better is that he is claiming a 25% reduction in the home's energy bill - not heating bill, but the energy bill. The sad thing is people still buy these kind of claims.

Has any credible building science study been conducted on the efficacy of radiant barriers in heating climates. I'm sure they work great in Florida to reduce cooling loads but to claim they work during the heating season in New England, it's impossible. 

According to the U.S. Department of Energy’s Energy Efficiency and Renewable Energy Clearinghouse, “Two field tests, one in Minnesota and one in Canada, both found that a radiant barrier placed over R-19 attic floor insulation (which is less than half the DOE minimum recommendation for those climates), found that the radiant barrier contributed to less than a 1% reduction in energy consumption for heating and cooling.” (sorry, couldn't find the actual study link)

And that was with R19. Any savings at all disappears when you consider most attics in a cold climate will have a higher R-value than R-19 and if they don't it will be much more cost effective to install an additional R30 blown fiberglass or cellulose.

Even if you were chasing these meager savings, a radiant barrier on the cold side of the insulation acts as a vapor barrier in the wrong location. Even if your using the perforated stuff you can have condensation freeze in the perforations and then wreak havoc on your insulation and possibly cause a huge mold problem.

The Lawrence Berkeley study is actually on cool roofs which is applying a reflective coating to the top side of roofs to reflect solar load. Lining an attic with tin foil is completely different and making the claim that is works in heating mode I think is outlandish and I won't buy it w/o some sound building science to back it up.

Here is the DOE Radiant Barrier Article link:

http://www.energysavers.gov/your_home/insulation_airsealing/index.c...

This is for the Costco people...

If you want it done right, Call me.

Wayne

Radiant insulation systems.

www.radiantinsulsystems.com

Attachments:

RSS

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum 10 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Blake Shurtz posted a discussion

Replacement for Energy Conservatory Flow-blaster

It's too bad that the flow-blaster is no longer being produced or technically supported. Does…See More
4 hours ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
7 hours ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
10 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
yesterday
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service