What About DIY Geothermal Heat Exchangers for Heat Pumps?

     Many of our pros here are also DIY experts. You may have done or plan to do some geothermal projects. Do you favor a contractor or yourself for the actually installation?

     To initiate the discussion, heat pump performances are closely linked to the outdoor heat exchanger. A geothermal heat exchanger can boost the performances substantially because it is warmer than air in winter and cooler than air in summer. However, the installation by an outsider can be very costly.

     To have the advantages of a geothermal heat pump without the high cost, Do-It-Yourself may be the best way to go. For what I think, I have published an article for http://heatexch.com/2013/07/12/diy-geothermal-heat-exchangers-for-h....

     Please add your comment to that article or here. Hope this discussion and your comment can help to get more geothermal heat pump installed with less costs.

     Thanks,

     Perry from http://heatExch.com.

Tags: About, DIY, Exchangers, GHE, Geothermal, Ground, Heat, Pumps, What, exchanger, More…heat

Views: 1694

Reply to This

Replies to This Discussion

Ground loop costs are the biggest expense of Geothermal. Doing the digging and installing the loop DIY sounds like a great way to cut installation costs.

What about sizing?  I have write the basic steps to size a GHE.  It would be great if you can check me out and give some comment. http://homeenergypros.lbl.gov/forum/topics/sizing-a-ground-heat-exc....

Thanks, Perry

RSS

Latest Activity

Dannie Jackson liked Allison A. Bailes III's group HVAC
19 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design
19 hours ago
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
20 hours ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
20 hours ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
20 hours ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
20 hours ago
Dannie Jackson posted a blog post
21 hours ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
22 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service