If you put housewrap on like this what benefit is there?

Views: 257

Attachments:

Reply to This

Replies to This Discussion

Maybe code requires it and the inspector doesn't care if it actually works or not?

Not clear what the problem is - is it upside down so you can't read it and therefore not giving the full advertising capability?  Or is it  not tucked under the fake siding above and we don't yet know what the flashing will be there?  Are there not enough fasteners with washers underneath?  Is the overlap of the two pieces too small?  Perhaps we don't know how many weep holes are in the J-channel across the bottom to let any accumulated water out?  Maybe it's that white pole interfering with the installation?

If this is step one on a vinyl siding job there may be clapboards or other siding on the first story wall that has or is suspected to have lead or asbestos. The wrap could be intended to encapsulate the potentially hazardous material. If that were the case, the building wrap should be installed shingle style where it ends at the second floor cladding (as per Ed M's remarks above).


WRT the upside down installation:  we often see this detail in projects done south of the equator.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Brad Cook 4 hours ago. 27 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco Oct 16. 1 Reply

Latest Activity

Brad Cook replied to David Butler's discussion How would you insulate this roof?
"Bill, you just posted a number of responses in different areas of the thread. I will try to respond…"
4 hours ago
Donald Hester liked Marc Tannenbaum's blog post 3 Issues HVAC contractors Should Know About Impacting Customer Comfort and Health
4 hours ago
Profile IconAlice Quinn and Donald Hester joined Home Energy Pros Forum
4 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"In an earlier response, I noted that we COULD haul drinking water and use the water we collect off…"
4 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"As to the elevations on the cupola – the existing windows up there might survive adding…"
4 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I believe the top chord of the trusses are 10" deep (but…"
4 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The cupola windows are the only place there would be a problem if 4" of foam were added above…"
4 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I don’t know about the fire dangers of PIC or other foams.…"
4 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service