If you put housewrap on like this what benefit is there?

Views: 257

Attachments:

Reply to This

Replies to This Discussion

Maybe code requires it and the inspector doesn't care if it actually works or not?

Not clear what the problem is - is it upside down so you can't read it and therefore not giving the full advertising capability?  Or is it  not tucked under the fake siding above and we don't yet know what the flashing will be there?  Are there not enough fasteners with washers underneath?  Is the overlap of the two pieces too small?  Perhaps we don't know how many weep holes are in the J-channel across the bottom to let any accumulated water out?  Maybe it's that white pole interfering with the installation?

If this is step one on a vinyl siding job there may be clapboards or other siding on the first story wall that has or is suspected to have lead or asbestos. The wrap could be intended to encapsulate the potentially hazardous material. If that were the case, the building wrap should be installed shingle style where it ends at the second floor cladding (as per Ed M's remarks above).


WRT the upside down installation:  we often see this detail in projects done south of the equator.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco yesterday. 1 Reply

Fixing a water heater?

Started by John Shillito in Best Practices. Last reply by Eric Kjelshus on Friday. 21 Replies

Latest Activity

Profile IconAvery T. Phillips, Sarah Burger, Troy Spindler and 2 more joined Home Energy Pros Forum
3 hours ago
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Interesting idea. Commercial roof on a slope! Typical density for roofing spray foam is 2.5 to 3.0…"
yesterday
Profile IconRandy Kinnison, Breanna Detwiler, Jeff Farlow and 7 more joined Home Energy Pros Forum
yesterday
Summer Redman added a discussion to the group Job Board
Thumbnail

Hiring 2 Training Specialists in Champaign-Urbana, Illinois

The Applied Research Institute (ARI) at the University of Illinois at Urbana-Champaign is seeking…See More
yesterday
Summer Redman joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
yesterday
Stacie Bagnasco replied to Evan Mills's discussion Dirty solar panels
"This is a great idea. I clicked on your discussion because it made me remember that I forgot to get…"
yesterday
Kirsten Richnavsky posted an event
Thumbnail

rCloud - The Future of Testing at Your Office or Home

October 18, 2017 from 2pm to 3pm
Integrating rCloud as an essential part of your RESNET QA process.Retrotec’s rCloud app is here,…See More
yesterday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service