Has anyone encountered a plenum only system with all flexible run outs and tried to get a velocity pressure when first run comes off within 18" of air handler? without testing individual runs at termination has anyone tried testing this close to air handler? is the number skewed? can you trust the test? Looking for insight.....running into this a lot lately with track homes and 6-8 foot  plenum only systems. Just wondering what everyone else is encountering and what your doing? 

Tags: Pressure, Velocity

Views: 168

Reply to This

Replies to This Discussion

Hi Horace,

Hard to trust the number as the air is so turbulent in this plenum, that it will be nearly impossible to develop an average velocity.

If you have a central return you could possible use a TEC TrueFlow grid or do a traverse with a large (4" dia) rotating vane anemometer or use a flow hood.

I will be doing a free airflow webinar soon (with BPI CEUs); look for it on our events calendar:

www.trutechtools.com/events

Thanks, i will.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 25 minutes ago. 13 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah 2 hours ago. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
25 minutes ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
1 hour ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
1 hour ago
Keith Tripp replied to Sean Lintow Sr's discussion Water Saver or Gimmick? in the group Best Practices (Residential)
"Interesting to see that recirc. has been in use for many years in some places. It is still a…"
2 hours ago
Mahendra Shah replied to John Krochmalny's discussion Psychrometric Chart Training
"John Thanks for show and tell tutorial"
2 hours ago
Walter Money replied to David Butler's discussion How would you insulate this roof?
"Gentlemen, and ladies, So, as I read this, I see a perfectly good roof that works in serious…"
4 hours ago
tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Those are DIY install prices - not that cost is relevant now. If the goal is to go carbon free,…"
4 hours ago
Profile IconAndy Piercefield, Paigh Bumgarner, Blake Reid and 4 more joined Home Energy Pros Forum
5 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service