I recently saw UV bulb installations in 2 HVAC systems in a home. Each system had the Lennox Healthy Climate filter box that has 2 UV-A bulbs inside; the label said 150 watts which I'm assuming is the total for 2 bulbs. These bulbs are on 24/7/365. I calculated that at 150 watts per filter box x 2 boxes they are consuming almost 2600 kWh per year, costing the customer about $30 per month. My recollection is that trying to sanitize the airstream is basically ineffective and that the only place it makes sense to use UV is on the coil and pan. Please confirm if I am right and if you can cite any sources for this that would be great. 

Tags: HVAC, UV, consumption, electrical

Views: 485

Reply to This

Replies to This Discussion

Ultraviolet (UV) light is part of a family of radiations called the electromagnetic spectrum. UV is just beyond the violet end of visible light and has smaller wavelengths and greater energy.

reflector design

I use a high end UV light in my own home,  If I cook BBQ inside the house it will stink for 30 min and the UV/air cleaner will clean it  up, I do not sick as most and I shake all hands.   if UV dose is large will change the DNA.   UV dose = intensity  X time.  I slow down the ECM blower motor  to 250 CFM but on 24/7/365 and with UV light & air cleaner it uses some $150 yr cost power and with a little outside air will keep building positive and blows out the dirt and vapors.  www.sanuvox.com  is one I have used for years and years.   There are others that work well also.   UV has been used for 70 years.   Down side is the UV can rot PVC wire coating and poly pans on AC coils.  Fiber glass is ok for a pan.  UV can eat up a filter in 30 days 

yourhome.honeywell.com/home/.../UV.../SummaryList.htm

RSS

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum 2 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 17 hours ago. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
2 hours ago
Profile IconCharles Buell, Robert Cowell, Alice Quinn and 1 more joined Home Energy Pros Forum
8 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
17 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
21 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
21 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
22 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
22 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"It kind of depends on the PIC. Not all insulation is made the same. Here in VT (and all of New…"
22 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service