Had our furnace and air ducts cleaned today for the first time in years; could have spun an entire dog from all the embedded hair.  The serviceman tried to upsell me with both a new reusable filter (to get 94% of the airborne substances), and a UV light to be installed in the furnace to get the other 6% worth of mold spores, bacteria and no-seeums.  I bought the filter and also a thorough cleaning of the furnace, but am waiting to decide on the UV light--another $400--until I can determine if this will really improve our indoor air quality.  The house is 1000 sq ft, one dog and two dogwalkers live there.  Any opinions?  One dogwalker (me) has asthma.  I couldn't find any research from a casual googling.

Views: 59154

Reply to This

Replies to This Discussion

UV lights have their place - but in my opinion are ridiculously oversold.  In order to do ANYTHING worthwhile they MUST shine directly on the evaporator coil / drain pan.  Any other location and they do nothing useful.  Only when the shine on the evaporator coil do they have a long enough exposure time to reduce mold and such.

If the UV light is expected to kill mold spores as they fly past in the return duct - it will NEVER happen.  the total dose in the fraction of a second the mold passes thru the light is way to small to damage the mold in any way.  And as far as "killing" mold spores - those are the toughest, most well protected life stage of mold.  It can survive for decades in harsh environments and still be viable.  Why would spores be 'killed' by a fraction of a second of UV?  If that were to happen, then non-metal ducts would not survive the UV light.

I bought the UV lights and found myself replacing the expensive bulbs way more often than one would expect.  I do not recommend the UV component unless there were a realistic possibility that it "might" (emphasize "MIGHT") be of some benefit to an extremely infirm occupant whose doctor recommends such equipment.  Our houses are not hospital isolation wards . . . not even if there is an asthmatic occupant. 

Still, ducts do need to be cleaned periodically.  It's not clear to me why anybody is surprised to learn this to be the case.  The insides of the ducts are inside your house every bit as much as the living room rug.  Vacuuming the rug the does not involve shining an ultraviolet light on the floor.

I did use the 4" pleated filter but went back to a more conventional "rock catcher." The high-MERV filters collect smaller and smaller particles and thus may disturb the air flow and compromise the life of the furnace by making the fan work more than it may have been engineered for and by allowing the heat exchanger to expand excessively because of overheating. 

Don't do UV.

Grab a MERV 13 from filtersfast or something.

RSS

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum. Last reply by Diane Chojnowski 36 minutes ago. 1 Reply

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 19 hours ago. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Diane Chojnowski replied to Mike Rogers's discussion Home Energy Pros and #MeToo
"Mike, thanks so much for supporting women and the #MeToo campaign. Women everywhere  have…"
36 minutes ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
1 hour ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
4 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
19 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
23 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
23 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
23 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service