I'm pretty sure I've never seen this stuff before. It's installed in rafters as batts, held in place by cardboard sheets below. Papery consistency, now crumbling. The house is ~1923, but no idea when this was installed.

Anyone know what it might be? Thanks for any help here.

Views: 6940

Reply to This

Replies to This Discussion

Cellulose?  Where is this house, humid area?

Never saw this, but looks a little like air-cell pipe insulation. This is considered Presumed Asbestos Containing Material.  You should have it tested by an accredited Asbestos Inspector before doing anything to disturb it. 

looks like old rock wool batts

It looks like some insulation I encountered on some ducting installed in the 1960s. I had it tested for asbestos and the results came back as just being all cellulose.

It appears to be mineral wool, but it could also be an old Balsam Wool (wood-fiber) batt. Neither would contain asbestos.

All I can say is that if it isn't known and has the appearance of something that could contain asbestos (i.e., not clearly fiberglass or mineral wool, etc), OSHA requires that it be PRESUMED to contain asbestos and treated as such until negated by testing.  So if unsure, testing is required if its going to be disturbed.

Expanding on the "humid area" question - do you think the material has gone through numerous wet/dry cycles?  Looks like it's turned to dried oatmeal in the pictures

Many thanks to all for suggestions here.

Over at InspectionNews someone else offered the name "Balsam Wool" — and with a little further digging online, that led me to what I now think is the actual answer, an old Kimberly-Clark product called "Kimsul".

Pennsylvania inspector Bill Kibbel, here, describes Kimsul as "layered creped paper," which fits my first impression of the stuff. The photo doesn't convey this very well. And as Ted Kidd says, it's pretty deteriorated at this point.

Kibbel seems certain that Kimsul was manufactured asbestos-free. NY inspector Debra Monte, on the other hand, here seems equally sure of the contrary. So at this point I'm expecting to have to get it tested. — I canned the BD test on my visit date, incidentally, because of this stuff.

I just joined this group, but knew the product immediately from the picture.  Kimsul was installed in all over the City of Richland in the early 1940's.  Richland was a government town built to house workers who were working on the Manhattan project. Were generaly give it an R1 per inch for attics, but in walls it crumbles over time.  I'm very interested in the asbestos testing.  We were told that it didn't have asbestos, I would love to know if you confirmed that.

looks like old rock wool batts

We had a sample of the insulation lab-tested, and the result was a negative without qualification — no asbestos found. This is only one case, of course. For all I know, some of the product was made with asbestos and some wasn't. But it would seem that it's wrong to say definitively that Kimsul has asbestos in it.

Still wise to wear a dust mask in any attic and around insulation generally, of course.

At least you know now.  So many materials contain asbestos its probably more difficult to say it doesn't than it does.  Good luck.

RSS

Latest Activity

Chris Dorsi posted an event
Thumbnail

2018 Habitat X Summer National Conference at Big Sky Montana

June 27, 2016 to June 29, 2016
The 2018 Habitat…See More
2 hours ago
Stuart Langley liked David Byrnes's blog post Strategies for Hiring and Interviewing for Home Performance Professionals
6 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Visual inspection can only confirm the presence of mold, not the absence.   That said,…"
9 hours ago
Armand C Magnelli replied to Don Fugler's discussion joining ducts in the group HVAC
"I often suggest pop-rivets as an alternative to sheet metal screws for both clothes dryer duct work…"
9 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Sampling would be primarily to verify 'Condition 1' or 'Normal Fungal Ecology'…"
9 hours ago
Daniel Cullen joined Building Performance Institute's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
9 hours ago
Daniel Cullen replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Can anyone tell me exactly HOW mold sampling impacts the mold remediation process or protocol? Why…"
9 hours ago
Daniel Cullen joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
9 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service