Trick for those who have ever input the wrong range on their gauge - blower door tech

I switched the Range Ring, but forgot to change the Range setting on my gauge. I recorded the Flow and left the site – do I have to re-test? Thankfully, NO, there’s an easy fix.

 

Just use the flow chart for your fan to locate the correct results!

Let’s say you read 33 CFM with your gauge set to Mid. But, yikes, later you remembered your DucTester actually had the Low Range Ring attached.  You recorded 33 CFM.

Find the 33 CFM you recorded under the “Mid“ Range column on the flow table. Then, just move over to the correct 7.1 CFM reading under the desired “Low” Range. That’s it! 

 

For the full article including the flow charts have a look at our blog:

 

http://retrotec.com/RetrotecBlog/tabid/540/post/i-recorded-flow-on-...

Views: 305

Reply to This

Replies to This Discussion

That's a good solution for correcting the error after leaving the site. 

I recommend changing the order of your range correction procedure.  When your gauge calls for the next smaller ring, change the gauge setting first, then install the ring.  You'll be less likely to forget to change the range setting if it's the first step and not the last step.

Dale S.

That's a great suggestion Dale.

RSS

Latest Activity

Jonathan Beers posted a discussion

MGE hiring for my job

I'm retiring next spring, and MGE is hiring:…See More
1 hour ago
Summer Reyes's blog post was featured

Equipment We Use: Detecting Water With Infrared Cameras

You know water is somewhere on the property, you can smell the mildew, but can't determine the…See More
2 hours ago
Profile IconGlenn Hourahan and Joseph Frasier joined Home Energy Pros Forum
2 hours ago
Alfredo Baccari added a discussion to the group Job Board
Thumbnail

HERS or/and BPI Energy Inspector in SF Bay Area (SAN JOSE, CA).

ELEM3NTS is a leading energy efficient consulting company specializing in residential homes. We…See More
3 hours ago
Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
4 hours ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
7 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
23 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service