Hello all,

 

I'm looking for energy audit training centers in the Boston, MA area.  Can anyone make any recommendations ?

 

Thanks,

 

Silvie

Views: 132

Reply to This

Replies to This Discussion

Here's what a google search for BPI Boston yields.

BPI.org has a list of bpi trainers in the Boston area. You can check with these places to see if they have a course in auditing. You can join linkedin and then the resnet group and ask for training in the Boston area.  Also, if you need IR training go to the Snell group and see when they offer training in the area.

Check community colleges to see if they have green collar auditing training.

Thanks for mentioning us, Carol--and what timing! We have a Level I Buildings course next week in the Boston area! For additional information that is on this site, click here. Otherwise you can go to our site or call us at 1-800-636-9820. As of today, there was still a couple of seats left in the course.
Thanks Carol,  Great info
If you are in the SE Mass/Cape Cod area, Cape & Islands Self Reliance is putting on BPI Envelope training next week for free and will provide an BPI Building Analyst course at the end of March also for free.  Check out http://www.reliance.org/ or call them for more information.

Hi Paul,

 

Do you work with that organization?  I tried to get a hold of the coordinator but it looks like she is on mat leave.  I'm  going to be in the Boston area for a few days in March and was looking to visit a few training centers, potentially give free training materials and do Retrotec equipment introductions for those interested. 

So, I went to their website and the "latest news"is from last fall. Are they still in business? And where did you find information on their BPI courses?

They definitely are still in business.  I teach their BPI courses for them.  Silvie, you should conact Megan Amsler megan@reliance.org  I'm sure she would love to hear from you.

RSS

Forum Discussions

LED's interfering with Garage Door Openers

Started by Bruce Navin in General Forum. Last reply by Liam Smith 4 hours ago. 14 Replies

Efficiency of furnace

Started by Jignesh in General Forum. Last reply by John Nicholas 14 hours ago. 13 Replies

Insulation Blower Recommendations?

Started by Jim Conlon in General Forum. Last reply by Brad Cook yesterday. 5 Replies

Best brands for furnace

Started by Jignesh in General Forum. Last reply by Eric Kjelshus yesterday. 2 Replies

Latest Activity

Liam Smith replied to Bruce Navin's discussion LED's interfering with Garage Door Openers
"Door openers operate with the remote control on radio frequencies, just like a remote-controlled…"
4 hours ago
John Nicholas replied to Jignesh's discussion Efficiency of furnace
"Any of the various energy modeling programs would give you a starting place. Model the ducts in…"
14 hours ago
John Nicholas replied to Jignesh's discussion Efficiency of furnace
"That is why gravity systems are much less popular then 50 years ago.   It could easily be…"
14 hours ago
Jim Baerg replied to Jignesh's discussion Efficiency of furnace
"This is a great discussion.  I'd like to ask a question about the distribution…"
15 hours ago
Michael R. Johnson posted a status
"Diane, Thank you for the welcome, I appreciate it. I look forward to contributing to the conversation. Michael"
18 hours ago
Gary Hall is now a member of Home Energy Pros Forum
yesterday
Brad Cook replied to Jim Conlon's discussion Insulation Blower Recommendations?
"Most rental machines will not put out the minimum required pressure for dense-packing. There are…"
yesterday
Brad Cook replied to Jim Conlon's discussion Insulation Blower Recommendations?
"We have been using the Intec Force II for almost 10 years. It only takes about 1 1/2 bags at a…"
yesterday
Eric Kjelshus replied to Jim Conlon's discussion Insulation Blower Recommendations?
"Most generator are more efficiency at 240 volt.   Its  about the total watts more…"
yesterday
Eric Kjelshus replied to Jignesh's discussion Best brands for furnace
"Its more about the install and air flow than the box brand,  Most brands about the same if you…"
yesterday
Eric Kjelshus replied to Jignesh's discussion Efficiency of furnace
"OK lets say you have a gravity air system with a 80% burn on heat exchanger with out the 8"…"
yesterday
John Nicholas replied to Jignesh's discussion Efficiency of furnace
"System Efficiency is great.  Not much use, if you don't intend to fix the various…"
yesterday
John Nicholas replied to Jignesh's discussion Efficiency of furnace
"Furnaces and all HVAC Equipment is rated by AHRI.  You can get the certification as to the…"
yesterday
Jacob Corvidae replied to Diane Chojnowski's discussion Support Mike Rogers in the group News & Announcements
"Hey Mike! We're all routing for you! Don't hesitate to ask for help.  Jacob"
yesterday
Jacob Corvidae joined Diane Chojnowski's group
Thumbnail

News & Announcements

Share your news and announcements with the community in this group.To post news or an announcement,…See More
yesterday
Diane Chojnowski added a discussion to the group News & Announcements
yesterday
Profile IconJeannette Moore, David Carson, Jesse Smith and 3 more joined Home Energy Pros Forum
Thursday
Home Energy Magazine's blog post was featured

How We Turned Our House into a Giant Foam Box, Part I — Wall Insulation By Wen Lee

Chris Stratton and Wen Lee are a husband-and-wife team living in the Los Angeles area who are DIY…See More
Wednesday
Home Energy Magazine posted a blog post

How We Turned Our House into a Giant Foam Box, Part I — Wall Insulation By Wen Lee

Chris Stratton and Wen Lee are a husband-and-wife team living in the Los Angeles area who are DIY…See More
Wednesday
Chris Stratton replied to Chris Stratton's discussion Technical question about mini split heat pump line set maximum length
"Hi Chris, Thanks again for your help. Update: the system is now up and running. Chris"
Wednesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service