What are the current protocols for testing spillage on a natural draft appliance under worst case in a mechanical closet that is too small for a person to fit in? Thanks!

Views: 165

Reply to This

Replies to This Discussion

You open the closet and test the appliance with the door open.  State in your notes that worst case was reached with the appliance door closed (make sure that is the case, often the greatest depressurization is with the door to the CAZ open)

You can stand outside and read pressures. Be sure to have extra hose as you need CAZ wrt outside pressure taken on the A channel, run a hose under the closet door (Input) and another hose to outside. Also you'll need vent wrt CAZ taken on the B channel , run a hose under the closet door into the vent (input) and another hose under the closet door (reference). Set up in worst case, fire the appliance, shut the door and monitor the pressure, if the vent is positive wrt CAZ the appliance is backdrafting.

For water heaters we also use a combustible gas leak detector on top of the water heater near the draft hood if it sounds off theres spillage.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 15 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah yesterday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Yeah. Gas water…"
yesterday
Eric Kjelshus replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"With super cheap natural gas prices now, still worth going all electric?  Tankless needs a lot…"
yesterday
Stuart Langley liked Chris Clay's photo
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service