Temperature Control Problems with Vision Thermostats

Temperature Control Problems with Vision Thermostats . The smoking gun is found! Plain old temperature control beats crazy electronic heat anticipatory thermostats every time. Get a horse!

Views: 350

Reply to This

Replies to This Discussion

It looks like the OP got "hack attacked" by getting a condenser swap w/o the matching air handler. Happens a LOT. Heat pumps are very sensitive to having the correct air handler and the installation must be done correctly. Ecobee thermostats let the installer choose how the thermostat handles temperature lag, time, temperature, or both.

Tom, I'm curious to know what smoking gun you are referring to. The link you provided is to an article on running heat pumps vs. auxilliary heat.

James: just read further down the above page, or do a control f for honeywell problem. thanks! t

Tom, Good discussion out there regarding each and every temperature control problem in Heat pumps. Well, I do have a experience that heat pump handle temperatures well below 30 without having to resort to AUX or EMG heating.


We're talking here about 2 things: how a thermostat controls a heat pump, and whether a thermostat controls on temperature or CPH(cycles per hour). Please read down the cited page to get to:" No, Honeywell does not do the swing.. the CPH would need to be changed. I know they say 9 for electric heat strips, but I always suggest seting it to 3, and you get a much longer run time and down time."

Since everyone knows about Hwell & Nest , which I believe control only on CPH. I'm going to install a LuxPro PSPU732T plus temperature sensor($100), which also controls only on CPH, but I can't afford an ecobe, which controls on temp!

Tom

RSS

Latest Activity

Dannie Jackson liked Allison A. Bailes III's group HVAC
14 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design
14 hours ago
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
15 hours ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
15 hours ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
15 hours ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
15 hours ago
Dannie Jackson posted a blog post
16 hours ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
17 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service