Technical question about mini split heat pump line set maximum length

Hello!

I'm installing a two-zone Mitsubishi mini split (in Pasadena, CA area, 1400 sf, single family detached, one-story home, if context is relevant). This is my first install, and I am trying to determine if extra refrigerant needs to be added based on the line set distance to each of the two indoor units. The outdoor unit is factory charged with R410A.

Outdoor Unit - MXZ-2C20NAHZ2

Indoor Unit 1 - PEAD-A12 (pipe length distance from outdoor unit: ~25 feet)

Indoor Unit 2 - MSZ-FH12NA (pipe length distance from outdoor unit: ~40 feet)

The manual (attached image) for the outdoor unit (MXZ-2C20NAHZ2) says "Max. pipe length per indoor unit for multi system" is 82 ft, and that refrigerant adjustment for longer lengths is 1.08 oz/5 ft. The manual for indoor unit 1 says maximum pipe length is 23 feet (before additional refrigerant is required). The manual for indoor unit 2 says maximum pipe length is 25 feet (before additional refrigerant is required). So...I'm trying to determine which number is applicable -- 82, 23, or 25? Does the system need additional charge?

I'll contact the manufacturer as well, but I thought I'd ask here in case anyone has installed one of these systems and already determined the answer to this question. Thanks for your help.

Views: 125

Attachments:

Reply to This

Replies to This Discussion

Hi Chris!

  I just happened to come across your question after I posted my most recent blog - Mitsubishi Ductless happens to be my specialty (and full-time job)!

  That condenser is pre-charged for 98' of pipe.

  Each zone can be a max 82' from the condenser.

  Total pipe length would be 164' (82 x 2).

I think the confusion regarding the 23/25 comes in if you are installing these as single zone systems...always check the install manual for the condenser on mylinkdrive.com : http://meus1.mylinkdrive.com/item/MXZ-2C20NAHZ2-U1.html

Hope you have a successful install, and a Happy New Year!

Chris

Chris,

A million thanks! This is very helpful; thank you for sharing your expertise. I can post an update once I'm further along. I am tempted to ask more questions but will not abuse your generosity. :) Happy New Year to you as well!

Chris

RSS

Latest Activity

Paul Raymer posted an event

Radon Protections in New Homes at On line

January 30, 2018 from 1pm to 2pm
Radon-resistant construction is becoming a focal point in the high performance building industry.…See More
4 hours ago
mark avila posted a discussion

Aeroseal Homeseal Pro unit for sale?

Hello,We may be in the market to purchase a used machine should someone have one for sale.Cordially,See More
5 hours ago
Robert Zockoff liked Tray Biasiolli's discussion Two-stage furnace, control at furnace or thermostat?
7 hours ago
Profile IconKevin Jacks, Christine Elovecky and Bryan McIntyre joined Home Energy Pros Forum
10 hours ago
Kevin Jacks liked Diane Chojnowski's group Job Board
10 hours ago
Scott Doyle liked David Butler's discussion RESNET gets serious about modeling platform consistency
11 hours ago
Quinn Korzeniecki posted an event

BPI Retreat at HPC New York 2018 at Saratoga Springs, NY

February 12, 2018 from 12pm to 4pm
BPI will be hosting a retreat for BPI GoldStar Contractors, Test Centers, Proctors, and Certified…See More
12 hours ago
Quinn Korzeniecki added a discussion to the group Building Performance Institute (BPI)
Thumbnail

BPI to Host Retreat for Stakeholders on February 12th

BPI will be hosting a retreat for BPI GoldStar Contractors, Test Centers, Proctors, and Certified…See More
12 hours ago

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service