Stopping Air Infiltration at Cable / Phone Line Entry

This is an entry point for cable TV coax, phone lines and a couple of grounds. They exit the basement of this home through a hole drilled in the foundation.

The air infiltration at this opening is significant. There is effectively a open path to the outside between every cable. If you flex the cables a bit you can see sunlight.

 

I'm struggling with how to stop the airflow. My first thought was expanding foam but that could be a mess and not guarantee that the leaks would be filled.

 

I searched the web but mainly came up with industrial products for outdoor utility boxees.

Any suggestions?

 

Thanks for your help,

 

Johnny

 

Johnny on Energy - Helping you improve your home energy efficiency.

Views: 224

Reply to This

Replies to This Discussion

Gosh, that's a lot of wires.  If there weren't quite so many, I'd suggest making a foam gasket so that each wire passed through its own hole.

 

How about if you attached a zip tie to the bundle of wires on one side of the wall to immobilize them, and then on the opposite side peeled the wires apart one at a time and injected caulk between them, then bundled them back together (squishing the caulk) and zip tied that end?  That would seal all the gaps between wires, leaving you with only the outside of the bundle to seal.  Of course, getting any wires in or out after that would be nearly impossible.

 

Looking forward to hearing other people's suggestions.

With access like that, I'd try pushing into gaps appropriate lengths of wooden dowel of various diameters, to function like shims and fill those gaps.  Clean and reversible.  If it doesn't work, pull them out and try another's suggestion.

RSS

Latest Activity

Chris Dorsi posted an event
Thumbnail

2018 Habitat X Summer National Conference at Big Sky Montana

June 27, 2016 to June 29, 2016
The 2018 Habitat…See More
7 hours ago
Stuart Langley liked David Byrnes's blog post Strategies for Hiring and Interviewing for Home Performance Professionals
11 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Visual inspection can only confirm the presence of mold, not the absence.   That said,…"
14 hours ago
Armand C Magnelli replied to Don Fugler's discussion joining ducts in the group HVAC
"I often suggest pop-rivets as an alternative to sheet metal screws for both clothes dryer duct work…"
14 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Sampling would be primarily to verify 'Condition 1' or 'Normal Fungal Ecology'…"
15 hours ago
Daniel Cullen joined Building Performance Institute's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
15 hours ago
Daniel Cullen replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Can anyone tell me exactly HOW mold sampling impacts the mold remediation process or protocol? Why…"
15 hours ago
Daniel Cullen joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
15 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service