Hi Guys:

 

I'm working more recently independently and know of a few groups in SF Bay Area that are looking for home energy audit / efficiency contractor representative.  I've found meetings helpful for anyone wanting to get the word out about what you do and get some referrals going.  Meetings are usually every two weeks or some once a week.  

Just send me a quick email or call if curious and we could share ideas.

 

Regards,

Jason C.
Berkeley, CA

510-917-3150 cell
www.mysolaradvisor.com
"Making it easier for any homeowner just
to check out solar and see if it's workable
and affordable for their home -- objectively!" 

Views: 249

Reply to This

Replies to This Discussion

I used to go to Splinter Group meetings in the East Bay... tons 'o contractors...

Hi Jason,

I recently started my business in Petaluma and am trying to utilize my Hers certifications. Right now I'm certified to do residential and non-residential alterations, refrigerant charge, and new construction verifications through CalCERTS. At the end of the month I'll have the ability to do PV/Solar.

I'm interested in any bay area industry groups that might help me make contacts and increase business. Any thoughts you have on this would be useful and appreciated.

Matt - 707-766-4692 - ecoiqhome@gmail.com

Another venue are the workshops and other sorts of gatherings (typically free) at the Pacific Energy Center in San Francisco.  There are also several active Association of Energy Engineers chapters in the area that might be of interest.

Jason,

I wasn't clear if you are hosting meetings or looking for local meetings?  For the latter, try http://www.cbpca.org which also teams up with Efficiency First.  E1st may still have an SFBA Chapter.  There's also Build It Green, which has regular "guild" meetings of green building pros.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 1 hour ago. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco Oct 16. 1 Reply

Latest Activity

David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
1 hour ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
5 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
5 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
6 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
6 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"It kind of depends on the PIC. Not all insulation is made the same. Here in VT (and all of New…"
6 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Filling those shallow valleys with rigid foam not only prevents primary foam panels from…"
6 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"Bill, you just posted a number of responses in different areas of the thread. I will try to respond…"
11 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service