This is a tricky one to google because "remote" is overshadowed by remote control apps for things like Nest thermostats.

My problem is this: the builders of my house wired the thermostat for the upstairs zone at the top of the stairs where the heat from the downstairs rises up and tricks it into thinking the whole zone is warm.  Moving the wires into the only bedroom upstairs, where the thermostat should have been all along, is cost prohibitive.


Is there a way to replace the old-fashioned wired thermostat with a digital wired thermostat that can be wirelessly controlled by a remote temperature sensor in the bedroom?  This would allow me to save energy by handling things in a more sensible manner than my current routine of trying to trick the thermostats into doing what I want.

Thanks you for any info on this you can provide.

Views: 2735

Reply to This

Replies to This Discussion

Some of the high end Honeywells offer that feature. What you are looking for is a wireless remote sensor. The thermostat will stay in it's current location and the wires sensor will be installed in eh room you wish to monitor.

Look into the Honeywell Redlink thermostats. Equipment module connects to furnace and wireless thermostat can be installed anywhere you like. Spendy, but if it's cheaper than pulling a new wire...

http://www.pexsupply.com/Honeywell-YTH6320R1001-Wireless-FocusPro-P...

Some thermostats also allow adding multiple sensors and then averaging them.  Any sensor you add must come from the maker of the existing thermostat.  You generally can not mix sensors.

You may want to look at NEST,  I believe they have remotes.

I've not seen them or heard of them, but they could be out there.

I can help you with this...message or email me

RSS

Latest Activity

Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Visual inspection can only confirm the presence of mold, not the absence.   That said,…"
1 hour ago
Armand C Magnelli replied to Don Fugler's discussion joining ducts in the group HVAC
"I often suggest pop-rivets as an alternative to sheet metal screws for both clothes dryer duct work…"
2 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Sampling would be primarily to verify 'Condition 1' or 'Normal Fungal Ecology'…"
2 hours ago
Daniel Cullen joined Building Performance Institute's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
2 hours ago
Daniel Cullen replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Can anyone tell me exactly HOW mold sampling impacts the mold remediation process or protocol? Why…"
2 hours ago
Daniel Cullen joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
2 hours ago
Debra Little's video was featured

Robert Bean, Iain Walker, indoor environmental quality experts

Robert and Iain discuss home indoor health & environmental quality. Design for human factors; thermal comfort, air quality, sound, odor...kitchen exhaust, th...
3 hours ago
Summer Reyes's blog post was featured

IAQ and Mold

What Is Mold?According…See More
4 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service