This is a tricky one to google because "remote" is overshadowed by remote control apps for things like Nest thermostats.

My problem is this: the builders of my house wired the thermostat for the upstairs zone at the top of the stairs where the heat from the downstairs rises up and tricks it into thinking the whole zone is warm.  Moving the wires into the only bedroom upstairs, where the thermostat should have been all along, is cost prohibitive.


Is there a way to replace the old-fashioned wired thermostat with a digital wired thermostat that can be wirelessly controlled by a remote temperature sensor in the bedroom?  This would allow me to save energy by handling things in a more sensible manner than my current routine of trying to trick the thermostats into doing what I want.

Thanks you for any info on this you can provide.

Views: 2684

Reply to This

Replies to This Discussion

Some of the high end Honeywells offer that feature. What you are looking for is a wireless remote sensor. The thermostat will stay in it's current location and the wires sensor will be installed in eh room you wish to monitor.

Look into the Honeywell Redlink thermostats. Equipment module connects to furnace and wireless thermostat can be installed anywhere you like. Spendy, but if it's cheaper than pulling a new wire...

http://www.pexsupply.com/Honeywell-YTH6320R1001-Wireless-FocusPro-P...

Some thermostats also allow adding multiple sensors and then averaging them.  Any sensor you add must come from the maker of the existing thermostat.  You generally can not mix sensors.

You may want to look at NEST,  I believe they have remotes.

I've not seen them or heard of them, but they could be out there.

I can help you with this...message or email me

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 10 hours ago. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco Oct 16. 1 Reply

Latest Activity

Profile IconCharles Buell, Robert Cowell, Alice Quinn and 1 more joined Home Energy Pros Forum
2 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
10 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
14 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
15 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
15 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
15 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"It kind of depends on the PIC. Not all insulation is made the same. Here in VT (and all of New…"
15 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Filling those shallow valleys with rigid foam not only prevents primary foam panels from…"
15 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service