Hi all! One of our readers sent us the following question. Can you please help him out?

"I clean air ducts and would like to expand into duct testing. What is a common fee to test for air duct leakage with a duct blaster and then what is a common charge to seal them?"


We'll pass along your answers. Thanks!

Views: 278

Reply to This

Replies to This Discussion

In all seriousness, knowing what I charge, or someone else charges isn't really going to help someone. We have a common term for that in the construction industry which is the "going out of business rate". One needs to sit down & really think about all the time involved, all of their overhead (including calibration, marketing), etc... how many they will realistically do and come up with a price. With that said, anyone that has realistically crunched the numbers for a stand-alone test is going to be around the $200 mark. Now if this is just an add on service - a while we are there, you are probably around a $100. (my page with rates: http://alagbs.com/duct-testing-alabama)

As for sealing them - good luck because it all varies on what the issue is & what it will take to get to them.

I am going to keep comments to myself on the cleaning part, but said individual will also need to address proper training & licensing

Solid advice - thank you!

The following ranges are for points of reference:

Standard fee for duct testing: $100 to $150.

Standard fee for duct sealing: $50 to $70 per man-hour. Jobs vary greatly, but a good start is the $300 to $600 range.

Hope this is a good start!

Thank you!

Not only look at sealing, but also balancing/improving/redesigning as needed. Many homes have hot/cold rooms and homeowners would love to get them fixed so they can use those rooms again. Keep in mind it's typically the lowest bidder that initially did the initial duct install, so few are done correctly.

I'll pass along - thank you!

RSS

Latest Activity

Jonathan Beers posted a discussion

MGE hiring for my job

I'm retiring next spring, and MGE is hiring:…See More
6 hours ago
Summer Reyes's blog post was featured

Equipment We Use: Detecting Water With Infrared Cameras

You know water is somewhere on the property, you can smell the mildew, but can't determine the…See More
7 hours ago
Profile IconGlenn Hourahan and Joseph Frasier joined Home Energy Pros Forum
8 hours ago
Alfredo Baccari added a discussion to the group Job Board
Thumbnail

HERS or/and BPI Energy Inspector in SF Bay Area (SAN JOSE, CA).

ELEM3NTS is a leading energy efficient consulting company specializing in residential homes. We…See More
9 hours ago
Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
9 hours ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
12 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
yesterday
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service