Hi all! One of our readers sent us the following question. Can you please help him out?

"I clean air ducts and would like to expand into duct testing. What is a common fee to test for air duct leakage with a duct blaster and then what is a common charge to seal them?"


We'll pass along your answers. Thanks!

Views: 279

Reply to This

Replies to This Discussion

In all seriousness, knowing what I charge, or someone else charges isn't really going to help someone. We have a common term for that in the construction industry which is the "going out of business rate". One needs to sit down & really think about all the time involved, all of their overhead (including calibration, marketing), etc... how many they will realistically do and come up with a price. With that said, anyone that has realistically crunched the numbers for a stand-alone test is going to be around the $200 mark. Now if this is just an add on service - a while we are there, you are probably around a $100. (my page with rates: http://alagbs.com/duct-testing-alabama)

As for sealing them - good luck because it all varies on what the issue is & what it will take to get to them.

I am going to keep comments to myself on the cleaning part, but said individual will also need to address proper training & licensing

Solid advice - thank you!

The following ranges are for points of reference:

Standard fee for duct testing: $100 to $150.

Standard fee for duct sealing: $50 to $70 per man-hour. Jobs vary greatly, but a good start is the $300 to $600 range.

Hope this is a good start!

Thank you!

Not only look at sealing, but also balancing/improving/redesigning as needed. Many homes have hot/cold rooms and homeowners would love to get them fixed so they can use those rooms again. Keep in mind it's typically the lowest bidder that initially did the initial duct install, so few are done correctly.

I'll pass along - thank you!

RSS

Latest Activity

Dannie Jackson liked Allison A. Bailes III's group HVAC
11 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design
11 hours ago
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
12 hours ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
12 hours ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
12 hours ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
13 hours ago
Dannie Jackson posted a blog post
14 hours ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
15 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service