Hello All,

We are working on a project with Habitat and our trying to provide recommendations for ventilation. We would like to see them install a Spot ERV like Panasonic's Whisper Comfort, but the small (<1,500sf) home (4 bdr) requires just over 50cfm fresh air. The Panasonic can only provide 40cfm continuous and installing two brings the incremental cost over an air cycler strategy or supply ventilation strategy too far off budget.

Does anyone have any experience / recommendations for how to best address this situation?

We are in Climate Zone 4, in Middle Tennessee, mixed-humid.

Thanks for any information!

Stefan

Tags: 62.2, ERV, ashrae, ventilation

Views: 595

Reply to This

Replies to This Discussion

Buy a larger one & use a timer - trust me when I say you do not want them running 24x7, especially in a humid enviroment

Sean, help a cold-climate guy out here... what's the issue with humidity and 24/7 run-time?

The humidity inside rises to much & in small houses where the AC unit is oversized because we cant buy a small enough unit...

There are a couple of pretty nifty choices from Venmar.  The Kubix unit comes in either an HRV or ERV version.  It uses 60 watts, 77% Apparent Sensible Effectiveness (ASE).  It's like a 16" cube using 4" ducting.  A more energy efficient alternative is the EKO version.  The ERV version is 73% ASE.  It uses between 26 and 37 watts with flows up to 84 cfm.  It doesn't require a drain in the ERV version.

These are not ceiling mounted units like the Panasonic, but I think getting the supplies and exhausts separated is a better way to go if possible.

I also work with Habitat and like yours, our houses have oversized units because of the extreme tightness, low UA numbers and limitations on ASHP systems.  We use a cycle timer and motorized damper for supply air ventilation. We are also considering ERV/HRV but before choosing and ERV I would have to ask if the manufacturer  can supply a certification that the latent energy (water) recovery does not include any VOC, airborne pathogens or aerosols from toilets. My request to Venmar got circled back to our sales rep who was unsure if such a certification was required.

RSS

Latest Activity

David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Static pressure drop through a straight length of pipe is a function of friction rate, and friction…"
48 minutes ago
Sean Wiens replied to Don Fugler's discussion joining ducts in the group HVAC
"Apparently the air passing over the PVC creates a strong static field that in turn impedes air flow."
1 hour ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Why would you think PVC has high resistance?"
1 hour ago
Sean Wiens replied to Don Fugler's discussion joining ducts in the group HVAC
"Thanks David - I was going to look at PVC for the HRV but was cautioned against it, not because of…"
1 hour ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Great post, Sean. I agree that screws are wise when joining metal ducts, but its also true that…"
2 hours ago
David Butler posted a discussion

Welcome Home Performance Forum Members (formerly RESNET BPI - Energy Audit and Home Performance)

Last month the Home Performance Forum merged with Home Energy Pros, now under the Home Performance…See More
2 hours ago
Sean Wiens replied to Don Fugler's discussion joining ducts in the group HVAC
"Various studies have indicated very little air flow along surface of duct (for ventilation - have…"
3 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don. We have never considered screws as impeding airflow, but I can see how in some ducts (e.g.…"
4 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service