Dear all, I am going to replace the HPS with the LED in the backyard.

May I ask that are core, universe LED flood lights suitable? Thanks a lot.

Actually how to properly illuminate the backyard? Thanks a lot :)))

Views: 158

Reply to This

Replies to This Discussion

You have to see the specks on the LED light. All tested bulbs have a graph with spread on height. Lets say your light replacement is 14 feet tall you cross the 14 feet to spread. I hope this helps but I do it all the time. Some High Presser Sodium will have a spread of 20 feet wide at 14 feet up.

Have you looked how much light you need in the backyard and where you need the light?  Often a one for one replacement is a gross overkill.  You may be able to significantly reduce the size (lumen equivalent) of the light.  Also are you in rural or urban area... if an urban area with neighbors close by you may want to choose a light that keeps more of the light on your back yard....

Well said Dennis, try a lighting calculation for the space you need.

Hi Mary,

What is the purpose of lighting the backyard ?  Sense of safety, night time enjoyment of the garden, some help seeing the path, to  walk from garage to home ?  Each of these purposes will lead to a different design. of fixtures, fixture placement and light source quality and output. Are you installing a 300 watt LED flood with the present efficacy of LED bulbs of close to 100 lumens per watt, that is a 30,000 lumens point source, that is a very bright light concentrated from a very small (surface area) source. Tell us more about what you want to accomplish, then the different solutions can be developed .

Greetings Jan Gravemaker.

RSS

Forum Discussions

Psychrometric Chart Training

Started by John Krochmalny in Training 12 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler on Monday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"Hi Mike, it's good to get some feedback from the field, and thanks for confirming Gen 3 is now…"
1 hour ago
B Eric Bell liked Bob Krell's group Healthy Indoors (IAQ)
9 hours ago
John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
12 hours ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
13 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
17 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
17 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service