What are inspectors using to detect the type of lighting found in residential applications? I need a meter to help detect CFL and LED lights so I don't have to get a ladder and remove shrouds.

Thanks.

Tags: CFL, light, lighting, meter, tools

Views: 115

Replies to This Discussion

If the question is "incandescent vs. compact fluorescent" OR "cfl vs. LED" -- then a diffraction grating will help. Go to a toy store and find the little cardboard glasses with plastic lenses that make every light bulb look like a rainbow.

See the attached handout. Incandescent lamps radiate across all visible wavelenghts, so in a diffraction grating you see a spectrum of colors all blended together. CFL's have 4, 5 or 6 phosphors blended together. The lamp makes light that we see as "white", but in fact each phosphor radiates at a very specific wavelength. Through a diffraction grating, you can see multiple images of the light source, each with the different color produced by that phosphor.

WHITE LEDs are doped to radiate across most of the visible spectrum. So a diffraction grating shows the same "smeared" continuous specturm as an incandescent bulb.

You can see this effect even if the lamp is in an enclosed luminaire -- the image of the luminaire will take on the property of the light source inside it.

So, in an older home that has not seen dedicated energy efficiency work recently, the question is probably "incandescent or CFL?" A diffraction grating will show the difference. In a home where the owner pursues energy savings, the question is probably "CFL or LED?" A diffraction grating will sort them out. If the space could well have incandescents AND LED lamps -- good luck.

Attachments:

RSS

Discussion Forum

Latest Activity

tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Yeah. Gas water…"
3 hours ago
Eric Kjelshus replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"With super cheap natural gas prices now, still worth going all electric?  Tankless needs a lot…"
4 hours ago
Stuart Langley liked Chris Clay's photo
9 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
10 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
11 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
11 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
12 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
12 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service