I'm glad to see LED fixtures finally becoming mainstream in the local big box stores. Purpose built fixtures make more sense than trying to make LED's look and work like A19 lamps. Here's an example of the fixture I saw at the local Home Depot today:

http://www.homedepot.com/p/Lithonia-Lighting-Versi-Lite-7-in-White-...

I'll post more photos/findings once I get it hooked up.

Tags: Fixture, LED, Light

Views: 1025

Reply to This

Replies to This Discussion

I too had the offset issue, the 2nd screw went direct into the ceiling joist. Oddly the smaller boxes seem more common than the larger ones in ceiling use.

There are 50 point LED's (possibly cree's devices) on the board.  The large black chip is most likely the a chip whose function is sensing dimming on the incoming power signal and translating that to the equivalent on/off duty cycle for the LED's.  Just a couple of small surface mount chip caps.. so no electrolytics to fail.  But heat is a silent killer for most IC's... if the fixture is hot - U1 is gets my second vote for the most failures.  First goes to the movistor.  The LED's are likely to suffer a "fading" effect and slowly become less effective. Four or five years from now you might notice a difference if you compare it against an identical fixture.  But then anyone expect a CFL last five years - with lots of use, dimming, and turning on/off....

At $30 I expect it to last, hopefully they stand behind their warranty for 5yrs if it doesn't. If it fails after 5yrs LED tech will be fully mature by then and newer better fixtures will be out. Fixtures designed for LED from the start have a lumen/watt advantage since they can take advantage of the native directional properties of LED. Fixtures also have more thermal management options compared to A19 retrofit laps, and as you said heat is the enemy of the electronics/driver circuit.

IMHO the best is yet to come for LED fixtures, I'm sure they are working on things we haven't even though of. Fixtures is what will revolutionize the LED lighting industry, not A19 replacements...

Generally based upon the needed requirements, The mode of selection will be depended. In these aspects, We must consider the high quality of LED strips which will help us to give more brightness while compared to the normal one.

reflector design

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco yesterday. 1 Reply

Fixing a water heater?

Started by John Shillito in Best Practices. Last reply by Eric Kjelshus on Friday. 21 Replies

Latest Activity

Profile IconAvery T. Phillips, Sarah Burger, Troy Spindler and 2 more joined Home Energy Pros Forum
7 hours ago
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Interesting idea. Commercial roof on a slope! Typical density for roofing spray foam is 2.5 to 3.0…"
yesterday
Profile IconRandy Kinnison, Breanna Detwiler, Jeff Farlow and 7 more joined Home Energy Pros Forum
yesterday
Summer Redman added a discussion to the group Job Board
Thumbnail

Hiring 2 Training Specialists in Champaign-Urbana, Illinois

The Applied Research Institute (ARI) at the University of Illinois at Urbana-Champaign is seeking…See More
yesterday
Summer Redman joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
yesterday
Stacie Bagnasco replied to Evan Mills's discussion Dirty solar panels
"This is a great idea. I clicked on your discussion because it made me remember that I forgot to get…"
yesterday
Kirsten Richnavsky posted an event
Thumbnail

rCloud - The Future of Testing at Your Office or Home

October 18, 2017 from 2pm to 3pm
Integrating rCloud as an essential part of your RESNET QA process.Retrotec’s rCloud app is here,…See More
yesterday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service