Are there suggestions out there as to the best way to insulate newly installed speakers!  I have been working to improve the  tightness of my 22 year old home but after that big effort, I installed 10 speakers in 5 rooms.  This, as one might suspect, has resulted in several holes leading from unconditioned spaces to conditioned spaces. Some folks say just drape insulation over the new speakers while other say build a box to protect the innards of the speakers from fiber glass, dust, etc. The latter is supposed to enhance the quality of the music emanating from the speakers but there are many opinions out there!

Views: 24574

Reply to This

Replies to This Discussion

From techstreet -- holder of some of the UL documents.... about UL-1715

"This test method is intended for use in the evaluation of the flammability contribution of wall materia l assemblies, ceiling material assemblies, or both, exposed to early fire growth under specified room fir e exposure conditions. The effectiveness of fire barrier materials as protection for other combustible materials or components within the assembly is of primary interest for this evaluation."

The point of suggesting to look for UL1715 and the ASTM numbers is that it might be that other good building materials would be found that could do a better job for John.  That was the reason for suggesting keywords for searches.

The Tenmat hats themselves provide the flame spread,  the fire stop foams/sealants, just cover the cases where flames might seep under the hats and into the attic.   They also stop the hats from rattling and dancing around in the attic when loud rock and roll is played  :-)

good point on the dancing. 

my only concern is that folks dont get the impression there are fire safe foam's out there.  if you ignite an piece of FS 25 foam and take the flame source away, the foam will self extinguish.  But, the tech data sheets the foam manufacturers provide will have footnotes saying their foam requires a 15 minute thermal barrier between the foam and the people.  that's becasue foam has a low self ignition temperaturte, and it is very good at holding heat in.  it doesn't take long for foam to burn when it is exposed to heat in excess of 450 degrees. 

RSS

Latest Activity

Bob Krell joined Tom White's group
Thumbnail

Trainers and Mentors

Share your experience with different training and mentoring methods. Learn about new training…See More
1 hour ago
Bob Krell replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Most of the moisture issues there can be attributed to failure to get the roof system completely…"
1 hour ago
Bob Krell replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"You are correct about it being multi-family.  It is, in fact, an assisted-living facility, so…"
1 hour ago
Quinn Korzeniecki added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Weatherization Pros: Only 9 Days Left to Apply for Free BPI Certification Exams!

Are you a weatherization professional? Don't miss your chance to get the costs of your new 2018 BPI…See More
1 hour ago
Quinn Korzeniecki posted a discussion

Weatherization Pros: Get BPI Certification Exam Costs Covered!

Are you a weatherization professional? Don't miss your chance to get the costs of your new 2018 BPI…See More
1 hour ago
Diane Chojnowski replied to David Butler's discussion Beginners Guide: Managing Subscriptions on Home Energy Pros
"Great guide David! Thanks! We send two weekly emails to keep members in the loop about new blogs,…"
3 hours ago
Summer Reyes's blog post was featured

Equipment We Use: Detecting Water With Infrared Cameras

You know water is somewhere on the property, you can smell the mildew, but can't determine the…See More
22 hours ago
Profile IconGlenn Hourahan and Joseph Frasier joined Home Energy Pros Forum
22 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service