Can anybody tell me if automatic door sweeps can be cut to size?  I see some that are 36" long but I need  to install one on a 30" basement door.  I'm looking for the kind that can be screwed to the inside surface of the door and springs up at an angle when the door is open.  There are a couple of brands I see (Frost King & M-D Building Prod.) but I can't really find info on how to install them.  Thanks

Tags: door, sweeps

Views: 445

Reply to This

Replies to This Discussion

Take a look at Pemko. They have good technical info on their site. The 4301 model may be what you want, available as short as 18".

I have used different models throughout the years. Love 'em. They can be cut to any size you want with a hack saw.

Must be cut with a hacksaw so that the hinge is not damaged. Biggest problem is placement of the closing cam on the stop trim- using the supplied larger screw  may split the stop trim molding so the cam cannot stay on securly so drill a pilot hole or use a smaller diameter screw.

thanks to all -- I did find what I was looking for on the Pemko site the second look around and --- I'll remember to install the cam with a pilot hole --- thanks!

I would contact the folks at MD Building products and find out what your options are.  Their website is mdteam.com

RSS

Forum Discussions

What made this chimney fall down?

Started by Eric Kjelshus in General Forum. Last reply by Eric Kjelshus on Tuesday. 7 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Dave Taylor Nov 11. 61 Replies

Manual J (SD) for custom, luxury homes

Started by Dav Camras in HVAC. Last reply by Dav Camras Nov 10. 3 Replies

Quantitative methods for residential zoning

Started by Brett in HVAC. Last reply by David Butler Nov 9. 1 Reply

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum. Last reply by Mike Rogers Nov 9. 3 Replies

Latest Activity

Profile IconSonny Roncancio and Chester Energy & Policy joined Home Energy Pros Forum
15 hours ago
Ryan Moore updated an event
Thumbnail

LEED for Homes Green Rater Training at Fort Collins, CO

December 7, 2017 to December 8, 2017
Green Insight will host this 2-day training in Fort Collins, CO December 7-8,…See More
yesterday
Rodney Bailey liked Rodney Bailey's discussion Energy audit equipment for sale.
yesterday
tedkidd liked Mike Rogers's blog post Focusing on payback to motivate customers?
yesterday
Home Energy Magazine's blog post was featured
Wednesday
Home Energy Magazine posted a blog post
Wednesday
Quinn Korzeniecki added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Rebates and Incentives: Illinois

Curious about home performance incentives and rebates available in your area? Check out this BPI…See More
Wednesday
Profile IconStacey Cordeiro and Melissa Ames joined Home Energy Pros Forum
Wednesday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service