Installing asphalt shingle roofing around dormers – a how-to primer

Here is an article I wrote about Installing asphalt roofing. I've attached the text here, and the link is within the body. Sorry if this isn't proper etiquette  it's my first post and I'm not entirely sure how to do this yet. Thanks guys, and let me know if you have questions!

Installing asphalt shingle roofing around dormers – a how-to primer

A brief guide and some helpful tips on how to install asphalt shingle roofing around a dormer

  • Do you like this article?
  • Share2

If you decide to install asphalt shingle roofing on your own home, there are a few tricks that can help. One of them has to do with installing asphalt shingles on and around dormers. Even if you are not installing the shingles yourself, it is helpful to understand how your roof shape and structure can affect your overall roofing cost. dormers

 

Dormer windows are windows that jut out from the slope of a roof. The entire structure that encases the window may also be referred to as a dormer. When installing shingles of any type on a roof, you will also need to add them to the small piece of roof that covers the dormer. In some cases, this piece resembles an actual miniature roof.

 

A roof that includes dormers may have more surface area that needs covering than a roof without dormers. This additional surface increases both material costs and labor time. Additionally, installing shingles around dormers requires a specific process that can be time consuming and will likely increase any roofing professional’s estimates for installing shingles.

 

To install asphalt shingles around a dormer, you begin by following standard asphalt roofing installation procedures until you reach the obstacle (the dormer).

 

Here’s a brief summary of steps for installing asphalt shingles on and around the dormer.

  1. Install a regular line of asphalt shingles at the point where the dormer top meets the roof.
  2. Use a chalk line to make vertical pattern marks to create a reference grid when you add the asphalt shingles, allowing you to keep the shingle pattern consistent.
  3. Move to the bottom of the dormer structure and begin installing asphalt shingles on the roof itself. Install the asphalt shingles up the roof, following the vertical pattern marks.
  4. Trim excess asphalt shingle material from the valley between the dormer and the roof.
  5. Install asphalt shingles on the dormer's roof surface, working from the outermost bottom section to the top part near the roof. Create an overlapping layer of asphalt shingles to cover the seam between the roof and the dormer.

 

You can follow roughly the same steps for any type of shingle, including fiberglass shingles, three-tab shingles and laminated architectural shingles. Make sure that you understand the layout of your roof and how different shingle types interact with shapes, crevices and obstacles before you start the project.

 

Since an error during a roofing job can have severe consequences for your home, it is essential that you know what you are doing when you install shingles. If you are not a professional, make sure you read other Reply! articles on roofing before you begin or use our reviews to find cost-effective professional services. Spending more for a solid roofing job can ultimately save you money if it helps you avoid future leaks or collapses. Even if you have a complex roof with many dormers, you may be able to get a good deal from a contractor who will install asphalt shingle roofing on your home.

 

Reply can immediately connect you to local roofing professionals who can assist you with your asphalt shingle roof.

Find the original article and more here: http://www.qualitysmith.com/request/article/installing-asphalt-shin...

Tags: asphalt, construction, dormers, exterior, how-to, repair, roof, roofing, shingles

Views: 5979

Reply to This

Replies to This Discussion

Very good article, Dale.  Roofing is an art or at least an "adventure"! :)  It takes significant experience to really start to understand water shed principle as it pertains to dormers, valleys, and common roof penetrations .  With roofing (shingling), you have to start small (simple roofs without a lot of dormers and other complex features).  Or, at least make sure you have assistance from someone who has experience with roofing.  The average homeowner is asking for problems if he or she sets out to re-roof their home right out of the gate.  And, the damage that can be done as well as the price of having it redone the right way can be costly.  The good news is, once you've finished replacing your first asphalt roof, on a 90+ degree day in August, you will be cured of your urge to roof for a very long time!!! ;)

RSS

Latest Activity

Jonathan Beers posted a discussion

MGE hiring for my job

I'm retiring next spring, and MGE is hiring:…See More
13 hours ago
Summer Reyes's blog post was featured

Equipment We Use: Detecting Water With Infrared Cameras

You know water is somewhere on the property, you can smell the mildew, but can't determine the…See More
15 hours ago
Profile IconGlenn Hourahan and Joseph Frasier joined Home Energy Pros Forum
15 hours ago
Alfredo Baccari added a discussion to the group Job Board
Thumbnail

HERS or/and BPI Energy Inspector in SF Bay Area (SAN JOSE, CA).

ELEM3NTS is a leading energy efficient consulting company specializing in residential homes. We…See More
16 hours ago
Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
17 hours ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
19 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
yesterday
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service