Hey all,

I'm looking to showcase the energy efficiency offerings we have.  We want to showcase some of our common solutions in our area, which are duct sealing, air sealing, energy efficient light bulbs, sealing chases and fir downs, and adding insulation.  We have a store where we are trying to do displays of each of these things.  What we've thought up for each is below:

Duct sealing - Fan with small plenum and two ducts coming off and terminating.  One sealed, one unsealed.  

Questions - Does anyone have pointers on what sort of fog machine and fan to use?  The idea behind these displays is that they can be turned off and on like a childrens museum display, by the push of a button.  Any pointers on what to use would be appreciated.

Air sealing - Looking for a plan for a plexiglass house where we can show air leakage. Again, looking for a plan for an "activate" button as well as a fan size and fog machine.  And house plans.  I've seen these at trade shows, if someone could show me a plan or even a good picture that would be awesome.

Energy efficient light bulbs - Who knows how to get one of those displays like they have at home depot?  We'd love to show one. 

Sealing chases - Probably goes along with the plexiglass house.  Thoughts?

Adding insulation - We were thinking of a basic plexiglass box with a thermometer under low insulation and under lots of insulation with heat lamps above.  Any other thoughts are welcome.

Overall, if you have any plans for how to make an energy efficient display, or knowledge on how to get one from a sales rep, we would love to know! Another thought we've had is an animation, going through the house with an interactive display. Does anyone have a lead on existing animations they've used?

Thank you!

Views: 194

Reply to This

Replies to This Discussion

Hi Daniel,

Trying to explain to a home owner what a thermal bypass is, is time consuming and mostly ineffective.  Yet a simple physical model will convey the explanation in a heartbeat.  And a dozen models will make you look like an expert.

A display can vary from pretty pictures to a small house constructed inside your office, space being the limiting factor.  If you have room, provide seating for 10 to 20 in an audience to listen to a short energy efficiency presentation.  If you lack that kind of space, then make many of your models portable so you can go on the road and take them along.  Public speaking is a great way to keep busy during slow times.

An important part of good displays is how well you support them with the related wording.  If every display provokes a list of questions then you will need an answer person available for everyone who visits.  If 10 people show up at the same time you will want those signs to answer most/all of their questions.  Murphy's law says they will most frequently show up in groups when only one person is in the office.

"Hands on" models has always worked for me in a variety of professions.

Bud

Hands on props are highly recommended; all the better in a store-front type environment. Over the years, we've developed and used many tangibles in our classes for home inspectors and REALTORS. 

One of my personal favorites is a portable light bulb comparison display we made from a pair of recycled old 6-lamp "bath bar" luminaires. We gave each its own pigtail, added a toggle switch to control each lamp base, and then mounted them both side-by-side on a musician's speaker stand. You can quickly and easily contrast numerous lamp attributes: waste heat, color temperature, beam spread, etc. in any combination you like. Add on a Kill-a-Watt meter (or two), and you can log kW or kWh too.

Or just turn on all 12 lamps at once, and give your class a free tan!

For more smart display ideas, check out the exhibits at any of these excellent energy training centers:

http://energydesignresources.com/training/energy-centers.aspx

Check the photos here -

http://homeenergypros.lbl.gov/profile/GreenJobsTrainingCenter

Maybe you will get some ideas.

RSS

Forum Discussions

Overheating garage

Started by Chris Bellanca in Best Practices. Last reply by Sean Lintow Sr on Friday. 2 Replies

E&O Insurance

Started by Rob Madden in General Forum on Thursday. 0 Replies

GSHP for domestic hot water

Started by David Holtzclaw in General Forum. Last reply by David Holtzclaw on Thursday. 3 Replies

Log home roof insulation

Started by Bob Reuther in Best Practices. Last reply by Daniel Baur-McGuire on Tuesday. 8 Replies

Latest Activity

Franco Oyuela commented on John White's blog post It’s Time to Replace Your Old Furnace and Air Unit with HVAC System
"Gas furnaces are one of the most energy efficient home comfort solutions you can have installed…"
58 minutes ago
Profile IconDavid Dennis, Lamont Goldstein, Trenton Fluetsch and 6 more joined Home Energy Pros Forum
1 hour ago
Michael Dunseith posted a status
Friday
CEE posted a blog post
Friday
Sean Lintow Sr replied to Chris Bellanca's discussion Overheating garage
"There are only two methods - block the heat before it gets in & exhaust what gets in Blocking -…"
Friday
John White posted photos
Friday
John White posted a blog post
Friday
Rob Madden posted a discussion

E&O Insurance

Any recommendations for a good E&O and general liability insurance carrier for energy…See More
Thursday
John Redmond added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Flir I7 Infrared Camera (Barely Used)

I have been away from this site for a while, so my apologies if this is supposed to be posted…See More
Thursday
John Redmond joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
Thursday
Hannah Wood liked Quinn Korzeniecki's discussion Application Period for 2018 Energy Auditor (EA) and Quality Control Inspector (QCI) Pilots Now Open
Thursday
Quinn Korzeniecki posted a discussion

Application Period for 2018 Energy Auditor (EA) and Quality Control Inspector (QCI) Pilots Now Open

We need you!Applications are now being accepted to participate in the 2018 Energy Auditor (EA) and…See More
Thursday
Quinn Korzeniecki added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Application Period for 2018 Energy Auditor (EA) and Quality Control Inspector (QCI) Pilots Now Open

We need you!Applications are now being accepted to participate in the 2018 Energy Auditor (EA) and…See More
Thursday
David Butler replied to Chris Bellanca's discussion Overheating garage
"Easy... insulate the attic ceiling. I'm not sure how much good it would do to air seal a…"
Thursday
Chris Bellanca posted a discussion

Overheating garage

Hi all, I'm looking for potential solutions to a problem at a client's house.  The south facing 2…See More
Thursday
Landon added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Brand new retrotec blower door system $3000

Hi, I’ve got a brand new blower door system from retrotec that I got 2 months ago, and never got…See More
Thursday
David Holtzclaw replied to David Holtzclaw's discussion GSHP for domestic hot water
"Thanks John & Bill. Bill your experience is one reason why I wanted a larger heat pump with…"
Thursday
Diane Chojnowski posted events
Wednesday
Rob commented on Bob Krell's group Healthy Indoors (IAQ)
"Hello, Has anyone tried custom filtering of window AC units? Specifically concerned with…"
Wednesday
Michael Dunseith's 2 photos were featured
Wednesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service