I just published this detailed post on solar pv vs. wind turbines for installations of the same cost:

http://homeenergypros.lbl.gov/profiles/blogs/residential-solar-pv-vs

 

I'm starting to come to the conclusion that except for a few spots in the U.S. (mostly in AK, HI, or on top of mountains) residential wind will always lose to solar PV assuming optimal locations for both (i.e. no shading on solar panels, no obstructions blocking wind) and the same capital outlay at the onset.  

 

I'm going to work on another blog post highlighting this fact, because it is rarely covered by most news media who don't even know the difference between a kW and a kWh, let alone know how to do the analysis themselves.  

 

What I'm looking for is someone who can tell me I am missing something in the analysis?  Any thoughts?

Tags: comparison, solar, vs., wind

Views: 144

Replies to This Discussion

@Chris - I'm not sure it's entirely fair to simply "halve" the cost of a PV system, particularly one that small, simply based on nameplate capacity. You still need to install all of the BOS components, etc.

 

@Leo - I sincerely doubt that articulation alone can double PV production, especially that far north. Articulating optimization tends to be more effective at lower lattitudes. I suspect that a PV system in MN gains a significant percentage of production efficiency simply because it is COLD there. Systems loose a lot when the heat increases.

 

Great to see this discussion!

I agree Mark. My wild guess on doubling PV output has no place in a serious discussion like this. That's how misinformation gets its start.

Remember the PV system was tracking the sun daily and seasonally which for residential roof top installations would be difficult if not impractical. It appears that PV comes out better with tracking unless the residence has an above average wind site i.e. higher ground in west or southwest Minnesota.

RSS

Discussion Forum

Latest Activity

Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
41 minutes ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
44 minutes ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
44 minutes ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
1 hour ago
Dannie Jackson posted a blog post
2 hours ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
3 hours ago
Summer Reyes posted a blog post
17 hours ago
Oliver Periman is now a member of Home Energy Pros Forum
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service