How to tell if home is balloon framed with IR Camera?

Is there a way to tell if a home if ballooned framed using the IR Camera or any other method?

 

I normally look in the attic to determine but  attic is floored and I cannot get close enough to the edge to have any hope of looking between the studs.

Thx

Views: 1088

Reply to This

Replies to This Discussion

What about dropping a weight on a string from the attic and seeing if you hit something about 8 feet down? Of course there's always the possibility of X-bracing or other blocking in the way to make things confusing, but if you try a few stud bays you might get a clear idea. If you can drop 15 feet of string down in a few places you'll be pretty sure.

 

IR might help, but it might not. From the exterior, some buildings have a "warm rim joist" look when the walls are well insulated but the rim is not, and it's heated inside and cold out. If there's no insulation anywhere it's going to be hard to tell.

If it is true balloon you can tell from either the attic or the basement as David said. Also if the house is a 2 story the windows on the on the first and second floor will line up with each other. There are several different forms of ballon framing. I ahve seen balloon framing just between the windows. Or you can have balloon style framing from the attic to the second floor.True ballon is open from the attic to the basenent including the ban joist between the floors, which is another discussion

What am I looking for in the basement?
What you may see in the basement sometimes is the actual  outside wall framing wide open to the basement. This, at least in my NE location is not the norm.They usally are blocked off. That does not mean that the house is not balloon framed. I have dense pack first floor walls from the basement on true ballooon even if it is blocked off. Using a right angle drill you can drill right thru the plate. Some pre planning needs to be done to make sure you do not drill into the actual floor above. This is a tough application but is an option if you are out of other options

RSS

Latest Activity

Chris Dorsi posted an event
Thumbnail

2018 Habitat X Summer National Conference at Big Sky Montana

June 27, 2016 to June 29, 2016
The 2018 Habitat…See More
4 hours ago
Stuart Langley liked David Byrnes's blog post Strategies for Hiring and Interviewing for Home Performance Professionals
8 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Visual inspection can only confirm the presence of mold, not the absence.   That said,…"
11 hours ago
Armand C Magnelli replied to Don Fugler's discussion joining ducts in the group HVAC
"I often suggest pop-rivets as an alternative to sheet metal screws for both clothes dryer duct work…"
11 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Sampling would be primarily to verify 'Condition 1' or 'Normal Fungal Ecology'…"
11 hours ago
Daniel Cullen joined Building Performance Institute's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
12 hours ago
Daniel Cullen replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Can anyone tell me exactly HOW mold sampling impacts the mold remediation process or protocol? Why…"
12 hours ago
Daniel Cullen joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
12 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service