How to keep mice, critters from getting into duct insulation that is under a house that is on piers.

How do you keep mice, critters from getting into duct insulation that is under a house that is on piers?

Views: 2330

Reply to This

Replies to This Discussion

A former owner where I did some repair work had evidently tried to keep the rodents out by nailing a flattened tin can over their entrance. Mice or rats I never determined, but they chewed right through that makeshift cover and continued to use the rafters as they wished. 

At a minimum I would recommend T&G plywood and hope they wouldn't be able to detect any warmth from above.  When the cold season comes they would make short work of 3/4" plywood.

There are some concrete based 4'x8' panels that besides being heavy might be better at keeping them out.  Of course mice will be a lot easier to stop than their larger cousins.

An abundance of traps to eliminate them before they start chewing their way in is always a good defense.  I try to avoid poisons and local domestic animals might be affected.

Bud

If your ducts are below the bottom sheathing I would wrap them or box them in with metal.

The ducts are below the floor and above the dirt under the houses. It sounds difficult and expensive to wrap them or box them in with metal.

mothballs have worked for decades

You have to keep it out of their reach thus a Sealed crawl is the best option

For a vented crawl, make sure all your insect & rodent proofing is in place also; Using flex duct is not recommended, nor fiberboard, just metal ducts sealed with insulation on the outside. Better to have to make a few cosmetic repairs occasionally then let them get into the system.

If an existing issue, how are they getting in, in some cases it is from above & that needs to be dealt with also: http://blog.sls-construction.com/2010/safety-sunday-rodent-prevention

We have used hardware cloth (1/4" mesh wire) and then sprayed it with single part foam. I have heard of used cat litter (urine smell) sprinkled about and moth balls as other options.

RSS

Latest Activity

Stuart Langley liked David Byrnes's blog post Strategies for Hiring and Interviewing for Home Performance Professionals
2 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Visual inspection can only confirm the presence of mold, not the absence.   That said,…"
5 hours ago
Armand C Magnelli replied to Don Fugler's discussion joining ducts in the group HVAC
"I often suggest pop-rivets as an alternative to sheet metal screws for both clothes dryer duct work…"
6 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Sampling would be primarily to verify 'Condition 1' or 'Normal Fungal Ecology'…"
6 hours ago
Daniel Cullen joined Building Performance Institute's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
6 hours ago
Daniel Cullen replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Can anyone tell me exactly HOW mold sampling impacts the mold remediation process or protocol? Why…"
6 hours ago
Daniel Cullen joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
6 hours ago
Debra Little's video was featured

Robert Bean, Iain Walker, indoor environmental quality experts

Robert and Iain discuss home indoor health & environmental quality. Design for human factors; thermal comfort, air quality, sound, odor...kitchen exhaust, th...
7 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service