HELP - AIR SEALING a Continuous Stone Interior/ Exterior Wall

I just recently audited a home that had a blower door number of 11,684 CFM50 and/or 11.81 ACH50. And of course one of the main air infiltration culprits was a stone face wall that was continuous on the outside and inside of the building envelope. The basics as I see it is this: the 1/4" stone joints allow air to freely flow into the house.

Does anyone know of any good methods to seal a high-end stone wall air leakage like this? 

Thanks.

Below are some photos:

PHOTO OF HOUSE Stone Wall Located Bottom Right

CLOSEUP PHOTO OF HOUSE Stone Wall / Back Exterior Door (OUTSIDE)

INFRARED/ ACTUAL Stone Wall/ Back Exterior Door (INSIDE)

INTERIOR WALL - INFRARED / ACTUAL



Views: 4065

Reply to This

Replies to This Discussion

Try log cabin chinking.

Air sealing a wall like this must be done with a vapor diffusive material or you will get spalled stone faces from sealing materials holding water. I recommend mixing hydrated lime with local clay soils, this is the way they have been sealed for millenia. Vapor open and beautiful. Do not use cement based products to fill the gaps as these are not vapor diffusive.

I've drilled wood window and door jambs on double wythe brick walls and then dense packed.  Helped a lot.  Dunno if that applies to your job.

Lots of interesting ideas.  Typically in the North East we would have just skinned stone on a masonry wall. You could mortar the joints. Obviously you could seal it an close it.  I would seal it with open cell spray foam, Keep the permeability between 3 and 10 perm.  Then air space and interior surface, like green board on steel or timber studs.

I hate to cover it.  The answer for the 100 year old stone foundation in a cheap farm house would be drylock on well prepared surface.

I liked the suggestion to look elsewhere.  You know where the air is coming in, so try to stop the air getting out.  Also, put some nice french doors inside these doors to separate this space from the rest of the house.  Obviously large open vertical columns of air, create their own motivating pressure.  But if you can seal the top, it will slow the infiltration in the bottom. 

RSS

Forum Discussions

Latest Activity

John Hatfield replied to David Butler's discussion How would you insulate this roof?
"David I think the finish edge application is critical but several un-knows exist. Such as how far…"
1 hour ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"@Kevin, that article is behind a pay wall. Here's the original posted on Allison's…"
2 hours ago
Kevin Miller replied to David Butler's discussion How would you insulate this roof?
"Good question.  I don't know the answer.   I'd love to know whether there…"
2 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Hi John, thanks for pointing out my faux pas: I made clear in my original post that rainwater…"
2 hours ago
John Hatfield replied to David Butler's discussion How would you insulate this roof?
"Kevin, Is the "Kool Seal" product certified for potable water collection?"
2 hours ago
Mike Berg joined Tom White's group
Thumbnail

Weatherization

Share your concerns and successes as a weatherization professional, or information for this…See More
3 hours ago
Profile IconBlake Reid, James Barras, Kathleen ODonnell and 5 more joined Home Energy Pros Forum
3 hours ago
Jon Finewood joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
3 hours ago

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service